SHRI G. S. INSTITUTE OF TECHNOLOGY & SCIENCE, INDORE

Govt. Aided Autonomous Institute Estd. In 1952, | Affiliated to RGPV, Bhopal & DAVV, Indore | "NIRF Ranked Institute"

Department of Industrial and Production Engineering

Dr. R. C. Gupta

  • Designation:  Professor and Head
  • Employee ID: 56
  • Qualification:  Ph.D
  • Date of Joining: 8/05/1985
  • : 0731-2582372
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Prof. R.C. Gupta obtained his B.E. degree in Mechanical Engineering from SGSITS (DAVV), Indore in the year 1983. Subsequently in the year 1986, he obtained his master’s degree in Industrial Engg and Management from SGSITS Indore and PhD in 2004 from DAVV, Indore. He has guided about 75 PG students and 4 PhD students. He has published about 75 research articles in National-International Journals and Conferences. He is the chairman of IIIE (Indian Institution of Industrial Engineering), Navi Mumbai and also a reviewer of Industrial Engineering journal. He has worked in the capacity of a member of many committees at the Institute level. He has served as the Head of Department of Industrial and production Engineering Department for about 10 years. Presently, he is serving as the Dean Administration in the institute. as well as Chairman Board of Studies of Industrial Technology in the MP state technical university RGPV, Bhopal.
Education and Qualification:
S. No.    
Degree                       Specialization                                                        Year              University/Board
1. Ph.D.  Production Management 2004  DAVV, Indore
2. M.E. (IEM)  Industrial Engg & Management  1986  DAVV, Indore/ SGSITS Indore
3. B.E.  Mechanical Engg.  1983  DAVV, Indore/ SGSITS Indore
Work Experience:

S No.

Post

Institute/Organization

From

To

Mode of selection

1

Professor

SGSITS Indore

30/08/2006

Till date

CAS

2

Reader/Assoc Prof

SGSITS Indore

09/10/1998

29/08/2006

Open

3

Lecturer

SGSITS Indore

05/08/1985

08/10/1998

Open

Research Details:
 
Research Area   
    
  •  Productivity Improvement,                            
  •  Quality Management,
  • Materials Management,
  • Industrial Engineering, 
  • Total Productive Maintenance.
PhD Supervision:
 
Publications:
(I) International/National Journal Publications


1. Chitale A. K, Verma S N and Gupta R C, “MIS-A fine carrier opportunity for Industrial Engineering and Management graduates” Udyog Pragati, NITIE, Bombay, AprilJune'95.(5)
2.   Chitale A. K, Verma S N and Gupta R C, “MIS-A fine carrier opportunity for Industrial Engineering and Management graduates” Udyog Pragati, NITIE, Bombay, April- June'95.(5)
3. Gupta R C, Verma S N and Chitale A.K, “Determination of some Anthropometric Dimensions of Indian male population” Industrial Engineering Journal, Mumbai, July'95.(3)
4. Gupta R C, Sonwalkar J and Chitale A K, “Overall equipment effectiveness through total productive maintenance” Prestige Journal of Management and Research (PJMR) April'2001.(12)
5. Gupta R C, Sonwalkar J and Chitale A K, “Economics of early equipment managementlife cycle costing” Vision :Journal of MDI Gurgaon, July-Dec’2003.(8)
6. Gupta R C, Sonwalkar J and Chitale A K “Development and analysis of a group replacement model” Journal of Industrial Engineering, Mumbai, July 2004.(6)
7. Zamare D L, Gupta R C and Chitale A K,“Analysis of tool geometry and development of tool geometry assessment graphs” International Journal of manufacturing technology and Research, Birla Institute of technology, Mesra, Ranchi, India, July – Dec 2008.(7)
8. Toke L K, Gupta R C, and Dandekar M, “ Techniques to optimize The supply chain in Reverse Logistics” Industrial Engineering Journal, Mumbai vol. 2(12), June 2010, 4-0.(7)
9. Kalpande S D, Gupta R C, and Dandekar M, “Analysis of Quality award Model for Achieving TQM”. Industrial Engineering Journal, Mumbai vol. 2(12), June 2010, 17-20. (4)
10. Kalpande S D, Gupta R C, and Dandekar M, “A SWOT Analysis of small and medium scale enterprises implementing total Quality Management” International Journal of Business, Management and Social Sciences” Nigeria vol.1(1) Sept. 2010 pp 59-64.(6)
11. Kalpande S D, Gupta R C, and Dandekar M, “Identification of strength and weaknesses of Indian Manufacturing SMEs using AHP approach” International Journal for Quality Research, Serbia vol.4(4) Nov. 2010, 263-269.(7)
12.   Kalpande S D, Gupta R C, and Dandekar M, “Study of SMES for TQM Implementation – SWOT Analysis” International Journa
13. Kalpande S D, Gupta R C, and Dandekar M, “ Implimentation of TQM Components in small and medium scale industries – AN AHP Approach” Industrial Engineering Journal, Mumbai vol. 2(23), May 2011, 36-40. (5)
14. Toke L K, Gupta R C, and Dandekar M, “Green Supply Chain Management : Conceptual basis and current status” International Journal of Computer Application in Engineering, Technology and Sciences(IJ-CA-ETS), vol. 3(1), March 2011, 223-228. (6
15. Marwah A K, Thakar G and Gupta R C, “A Critical study of Quality of healthcare Services : Using SERVQUAL” IIMT Business Review, Greater Noida vol.3 June2011, 96-104.(9)
16. Toke L K, Gupta R C, and Dandekar M, “The Implementation and Barriers of Green Supply Chain Management in Indian Manufacturing Industry” International Journal of Innovations in Mechanical and Automobile Engineering, March - 2013, pp 91-97(8) ISSN:2249-2968
17. Toke L K, Gupta R C, and Dandekar M,” An empirical study of green supply chain management in Indian perspective” International journal of Applied Sciences and Engineering Research, vol.1, No.2 April 2012 (ISSN 2277-8442).
18. Ujjainwala F, Dandekar M, and Gupta R C, “ Application of value stream mapping for identification & Elimination of wastes in process industry in Indian conditions” Industrial Engineering journal Vol. V & No. 11 November 2012, ISSN
19. Sharma P, Thakar G, and Gupta R C, “ An AHP approach comparing multi criteria assembly line balancing heuristics” International Journal of Industrial Engineering & Technology (IJIET) ISSN 2277-4769 Vol. 2, No. 3, Dec. 2012
20. Kalpande Shyamkumar D., Gupta R.C. And Dandekar Milind D., Identification of important factors for implementation of TQM in India SMEs in context of Vidarbha and Khandesh region’’. Vol. 12. Nos. 4/5/6, Sept. 2013
21. Sharma Pallavi, Thakar Girish, Gupta R.C., Evaluation of multi criteria assembly line balancing by MCDM approaches: A conceptual Review” Jan. 2014, ISSN 1800-6450
22. Marwah Amit Kumar, Thakar Girish, and Gupta Ramesh Chandra, A’confirmatory study of supply chain performance and competitiveness of indian manufacturing organizations’’ Feb. 25, 2014 ISSN 1800-6450
23. Rohit Kumar, Gupta R.C., Thakar G.D., and Mahajan M.D., ‘’Assessment of Safety Life Cycle (SLC) model to overcome the safety hazards; A case study. Vol. VII & issue No. 4 April 2014.
24. Marwah Amit Kumar, Thakar Girish, and Gupta R.C., ‘’Supplier-buyer relations and human metrics affecting supply chain performance: An empirical study of Indian manufacturing organizations’’ vol. 38, No.3, September 2014
25. Jain Abhishek, Gupta R.C., Soni S.C., “Critical success factors for TPM implementationAn overview”, Vol. VII & issue No. 10 October 2014.
26. Jain Abhishek, Gupta R.C., Soni S.C., “Analytical Hierarchy Process for identification of attributes for TPM implementation” vol.3, issue 3 December 2014, ISSN No. 2277-7733
27. Mandloi Ramnendra, Gupta R.C., “Wire Coating Composition Optimization Using Design of Experiments” Vol. VIII & issue No. 9 September 2015
28. Patkar Neha, Gupta R.C., Mahajan M.D., “Quality Function Deployment A Case Study On Water Cooler” Vol. X & issue No. 9 September 2017
29. Bhalla Hitarth, Gupta R.C., “Improving Efficiency Of Precision Instruments Using Six Sigma Methodology” Vol. X & Issue No. 11 November 2017.
30. Chouksey Priyansha, Deshpande Aparna, Agarwal Praveer, Gupta R.C., “Sales Forecasting Study In An Automobile Company- A Case Study” Vol. X & Issue No. 12 December 2017.
31 Chourasia Shubhangi, Bhandari Abhishek, Badgujar Pratik, Thakar G.D., Gupta R. C., “Job Evaluation In A PVC Manufacturing Company – A Case Study” Vol. XI & Issue No. 1 January 2018.
32. Jadia Pravar, Agrawal Praveer, Gupta R.C., Paliwal Priyank, “Six Sigma Implementation On A Production Line – A Case Study”
33. Chaurey, S., Kalpande, S. D., Gupta, R. C., and Toke, L. K., (2023), "A review on the identification of total productive maintenance critical success factors for effective implementation in the manufacturing sector", Journal of quality in maintenance engineering29(1), 114-135; DOI: https://doi.org/10.1108/JQME-11-2020-0118 
34. Chourey, S., Kalpande, S.D., and R.C, Gupta, (2023), "Development and validation of TPM implementation practices in industries: investigation from Indian SMEs", Operations Management Research, 16, pp. 1814–1829; DOI: https://doi.org/10.1007/s12063-023-00387-8
35. Shukla, P., Rohit, K., Dalpati, A., and Gupta, R.C., (2024), “Insights from deploying Industry 4.0 Technologies towards Sustainable Business Performance: A Study based on Applied Methodology of SLR”, Lecture Notes in Networks and Systems (Accepted/In-press) [Indexing: Scopus, INSPEC; ISSN: 2367-3389]

(II) International/National Conference Publications
1.   Heuristic approach of line balancing with Random absenteeism, R.C. Gupta, A.K.Chitale, N.Dubey, 24th Annual Convention of the operational research society of India (ORSI-91) at Bangalore, Dec.'91, (06).
2. Extension of the linear decision rule for scheduling production and work force, V.N. Garg, A.K. Chitale, R.C. Gupta, 25th Annual Convention of ORSI at, Ahmedabad, Dec.'92, (05).
3. Aggregate production planning using transportation I.P. Model an implementation methodology, V.N. Garg, A.K.Chitale, R.C.Gupta, 25th Annual Convention of ORSI at Ahmedabad, Dec.'92, (05)
4. Determination of some Antrhopometric dimensions of Indian male population using statistical techniques, R.C.Gupta, S.N.Verma, A.K.Chitale, 36th National Convention of the IIIE at Bangalore, Oct.'94, (04)
5. The effect of New financial policy onf salaried personnel, R.C. Gupta, Lt. Col. Devarajan, 36th National Convention of the IIIE at Bangalore, Oct.'94, (04).
6. Computer Aided Integrated Cost Planning of multistoried building, R.C. Gupta, 36th National Convention of the IIIE at Bangalore, Oct. '94, (07).
7. Flow Graph Approach to probabilistic Inventory models, A.K. Chitale, K.K. Bharani, R.C.Gupta, 36th National convention of the IIIE at bangalore, Oct.'94, (3)
8. Can Production and Marketing Co-exist?, R.C.Gupta, M.L. Gupta, All India seminar on Advances in Industrial Engg. and Productivity improvement techniques (AIEPIT) Allahabad., Feb.'95,(06)
9. Quality Circles: Why and how it should be encouraged, R.C. Gupta, M.L. Gupta, All India Seminar on Advance in Industrial Engg. and productivity improvement techniques (AIEPT) Allahabad., Feb.'95, (07)
10. Product Management Nature and Scope, A.K. Chitale, K.K. Bharani, R.C. Gupta, All India Seminar on Advance in Industrial Engg. and productivity improvement techniques (AIEPT) Allahabad, Feb.'95, (06)
11.   . Business Process Re-Engineering-An Imperative Need, R.C. Gupta, Eleventh Indian Engineering Congress, Bangalore, Dec.'96, (06)
12. Inventory Control Policy using Modified economic Quantity formula and exchange curve, 17th National Convention of Mechanical Engineers, S.G.S.I.T.S.,'2001, Indore.
13. Total Productive Maintenance- An Effective Vaccine for Indian Industry, International Conference on Management of Research and Development (ICMARD-2003) IIT, Delhi,2003
14. A Distance Learning Model For Management Education, Practices, Tools and performance parameters, International Conference on Reshaping Management Education in Global Context, DAVV, Indore, Nov. 2003
15. Systems Approach to Orientation and Training: Key to organization effectiveness, International Conference on Productivity , Quality and Research (ICPQR) ,IIT , Delhi., Dec. 2005.
16. Supply Chain Production Planning in a Mass Customization Environment”, National Conference on Advances in mechanical Engg., (ECKAME) , Engg. College, Kota, March 2006
17. “The Market Potential Analysis: The New Vistas” National Conference on Business Optimization Research Wave, NITIE, Mumbai, February 2007.
18. “Lean Manufacturing Implementation – In An Educational institute and in a hospital”, National conference on recent developments & Futuristic trends in Mechanical Engineering, (NCME – 2007) Shri Ram College of Engineering & Management, Gwalior (M.P.), April 2007
19. Promoting Clinical Quality Improvement and Enhancing Patient Satisfaction by Quality Function Deployment in a Hospital”, National conference on recent developments & Futuristic trends in Mechanical Engineering, (NCME – 2007) Shri Ram College of Engineering & Management, Gwalior (M.P.), April 2007
20. Statistical Process Control Techniques in Software Process” National Conference on Advances in Manufacturing & Industrial Engineering (NCOAIMAIE) Hyderabad, July 2007
21. “Green Supply Chain Management: A Review of the Literature and Frame work for Future Investigation” International Conference, Kovilpatti, T.N., India, Feb 2009
22. “SWOT Analysis for TQM Adoption in SMEs” International Conference for Emerging Research and Advances in Mechanical Engineering, ERA 2009, Velammal Engineering College, Chennai, T.N., India March 2009
23. Analysis of Quality Award Models for Achieving TQM” National Conference, Mata Vaishno Devi, Nov 2009
24. Reverse Logistics and Its Needs: A Review” National Conference on Current Trends in Technology, (NUCONE), NIRMA Institute, Ahmadabad, Nov 2009.
25. Toke L K, Gupta R C and Dandekar M, “How Green is Supply Chain ? Practice & Research” International Conference on Advances in Industrial Engineering, Anna University Chennai- T.N. India 6-8th Jan. 2010
26. Toke L K, Gupta R C and Dandekar M, “Identifying the relative importance of implementation strategies in Green Supply Chain Management (GSCM) Practice via fuzzy analytical hierarchy process (FAHP)” National conference on recent trends in Mech. Engg., RTME, March 2010, 120-127.
27. Kalpande S D, Gupta R C and Dandekar M, “ AHP based study of TQM Implementation Factor” National conference on recent trends in Mech. Engg. , RTME, March 2010, 155- 157.
28. Diwakar G.K., Dalpati A., Gupta R.C. “A Suvey on Third Party Logistics (3PL) in Practices Manufacturing Industries”, National Conference on Emerging Challenges for Sustainable Business, IIT Roorkee, June 2012.
29. Kamlekar Nishant,Gupta R.C., Dalpati A. “Implementation of Assembly Line Balancing in a Labour Intensive Manufacturing Unit”, National Conference on Emerging Challenges for Sustainable Business, IIT Roorkee, June 2012.
30. Kalpande S.D., Gupta R.C., Dandekar M.D., “ Reliability Analysis of TQM barriers faced by industrial backward region SME’s in India” 3rd International Conference on Production land Industrial Engineering CPIE 2013, NIT, Jalandhar, March 2013.
31. Kalpande S.D., Gupta R.C., Dandekar M.D., Reliability Analysis of TQM barriers faced by industrial backward region SME’s in India” 3rd International Conference on Production land Industrial Engineering CPIE 2013, MET’s Institute of Engineering, Bhujbal Knowledge City, Nashik Maharashtra March 2013
32. Sharma Deepak, Gupta R.C., “Finite Element Analysis of Two Wheeler Spokes Pattern for Optimization: A Case Study” ICIE, November 2017
Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1.

Book Authored: Chitale, A. K., and Gupta, R. C., (2023), Product Design and Manufacturing, PHI Learning Pvt. Ltd. (7th Edition)  Product Design and Manufacturing  2023
2. Book Authored: Chitale, A. K., and Gupta, R. C., (2014), Materials Management, A Supply Chain Perspective: Text and Cases, PHI Learning Pvt. Ltd. (3rd Edition) Materials Management, A Supply Chain Perspective: Text and Cases 2014
3. Board-of-Studies (BoS), Industrial Technology, Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV) Chairman 2023-2024
4. Indian Institution of Industrial Engineering (IIIE), Indore Chapter Chairman 2023-2024
5. International Conference on “Humanitarian Engineering Practices in Fire, Industrial Safety & Disaster Management (HEFSD 2024)“ Advisory Member 2024
6. Editorial Board, Industrial Engineering Journal [Indexing: UGC-Care List] Member 2023-2024

Dr. G. D. Thakar

  • Designation:  Professor
  • Employee ID: 54
  • Qualification:  Ph.D.
  • Date of Joining: 20/03/1985
  • : 0731-2582372
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Prof. Girish Thakar obtained his B.E. degree in Mechanical Engineering from SGSITS (DAVV), Indore in the year 1983. Subsequently, in 1984, he obtained Diploma in Marketing Management (DMM), where he stood fourth in merit. Later in the year 1988, he obtained his master’s degree from IIT Kanpur and PhD in 2011 from DAVV, Indore. He has guided about 75 PG students and 4 PhD students. He has published about 75 research articles in National-International Journals and Conferences and has a book chapter to his credit. He is the founder chairman of IIIE (Indian Institution of Industrial Engineering), Navi Mumbai and also a reviewer of Industrial Engineering journal. He has worked in the capacity of a member of many committees at the Institute level. He was also the Head of Department of Industrial and production Engineering Department for two years.
Education and Qualification:

No.

Degree

Year               


University/Institute             

Specialization

1.     

Ph. D.          

2011 DAVV, Indore  Mechanical Engineering (Product Design for Environment)                                                                                        

2.

M.Tech.

1988 IIT Kanpur  Mechanical Engineering (Mfg. Sc. & IE)

3.

B.E.

1983 DAVV, Indore  Mechanical Engineering

4.

Diploma in Marketing Management (DMM)   1984 IMS, DAVV, Indore  Marketing Management
Work Experience:
S.No.Designation DepartmentEmployer  NameDuration of Employment
 1.  Trainee Engineer  Training in Various Departments of Industry M/s Methodex Systems Ltd., Indore  11.09.1983 to 10.09.1984
2. Assistant Planning Engineer Production Planning M/s Methodex Systems Ltd., Indore 11.09.84 to 16.03.1985
3. Lecturer IPE Department SGSITS, Indore 20.03.1985 to 09.10.1998
4. Reader IPE Department SGSITS, Indore 09.10.1998 to 31.12.2005
5. Associate Professor IPE Department SGSITS, Indore 01.01.2006 to 10.03.2011
6.

Professor

(i) Head, IPE Department

(ii) Head, DOMS

(iii) Dean (Skill Development & Placement) 

IPE Department

        -do-

        -do-

SGSITS, Indore

11.03.2011 till Date

01.12.2016 to 30.11.2018

01.12.2020 till date

1.12.2023 till date

Research Details:

Research Interests

  • Industrial Engineering 
  • Marketing Management            



PhD Supervision:

(I)

Ph.D. Completed and Awarded (04)

(i)             

Mr. Amit Marwah- “Supply Performance for Competitiveness of Indian Manufacturing Organizations”

Awarded (15.12.2017)

(ii)            

Mr. Bachchan Kanoongo – “A Study of Lean Manufacturing and Safe Practices in Indian Pump Industries”

Awarded (30.03.2019)

(iii)           

Ms. Pallavi Sharma – “Comparative Analysis of Assembly Line Balancing Techniques Using MCDM Approaches”

Awarded (14.06.19).

(iv)           

Mr. Mayank Dev Singh- “Study of Implementation of Lean Green Six Sigma in the Indian SMEs Particularly in the State of Gujrat”

Awarded (13.07.2019).

(II)

Ph.D.  Submitted and Under Evaluation (Nil)

(i)             

(III)

Ph.D.  under Process: 02

(i)             

Mr. Avin Chandrakar (Registered in RGPV, Bhopal); Status: Completed Course Work

(ii)  Ms. Neha Patkar (Registered in DAVV, Indore); Status: Completion of Course Work and RDC Approved; Research Domain: Analysis and Optimization of Supply Chain Performance using Industry 4.0 Technologies
Publications:

Research Paper Publications

(I)      International/National Journal Publications

(a)

International Journals (14):

(i)

“An Integrated Process Planning and Part Programming System for Rotational Components”, Computers in Industry, Elsevier Science, North Holland, Vol.21. No.3, Feb., 1993, pp 341-357.                                                                                          


(ii)

"An AHP Approach for Comparing Multi Criteria Assembly Line Balancing Heuristics", International Journal of Industrial Engineering & Technology (IJIET), ISSN 2277-4769, Vol.2, Issue 3 Dec 2012 pp 15-26.

(iii)

“Determinants of Supply Chain Performance of Indian Manufacturing Organizations” International Journal of Business Research and Management (IJBRM), Vol.4, No.2, 2013.

(iv)

“Interpretive Structural Modelling of Functional objectives (Criteria) of Assembly Line Balancing Problem” International Journal of Computer Applications (IJCA) December 2013.

(v)

“Evaluation Of Assembly Line Balancing Methods Using An Analytical Hierarchy Process (AHP) And Technique For Order Preferences By Similarity To Ideal Solution (Topsis) Based Approach” International Journal for Quality Research (IJQR) January 2014

(vi)

“Evaluation of Multi Criteria Assembly Line Balancing by MCDM Approaches – A Conceptual Review” International Journal for Quality Research (IJQR) February 2014.

(vii)

” A Confirmatory Study of Supply Chain Performance and Competitiveness of Indian Manufacturing Organizations” International Journal for Quality Research (IJQR) March 2014.

(viii)

“Evaluation of Multi Criteria Assembly Line Balance by MCDM Approaches: A Conceptual Review” International Journal for Quality Research 8(1) 87–106, ISSN 1800-6450, Jan, 2014

(ix)

“A Confirmatory Study of Supply Chain Performance and Competitiveness of Indian
Manufacturing Organization” International Journal for Quality Research 8(1) 23–38, ISSN 1800-6450, Feb, 2014

(x)

“Determinants of Supply Chain Performance of Indian Manufacturing Organization” International Journal of Business Research and Management (IJBRM), Volume (5): Issue (1): 2014, 2014

(xi)

“Identification of Factors Affecting Lean Manufacturing Implementation of Pump Manufacturing Companies in India – A Case Study” International Journal of Quality Research 10(3) pp 495-510, ISSN 1800-6450, Feb, 2016.

(xii)

“Productivity Enhancement at an Indian Iron & Steel Re-Rolling Mill Performance Improvement Vol. 56 No. 7 PP 25-34, Aug. 2017.

(xiii)

“Prediction of Demand for Supply Chain using Time Series Predictive Models”, International Journal of Computer Applications, Volume 175– No. 22, P 33-39, ISSN (0975 – 8887) October 2020.

(xiv)

“A Sector Wise Prioritization of Vendor Selection in Supply Chain using Multi-Criteria Decision-Making Methods” International Journal of Computer Applications, Volume 174 – No. 18, February 2021, (0975 – 8887).


(b)

National Journals (23):

(i)

“Quality Enhancement by Implementation of Layered Process Audit in Engine Component Manufacturing” Industrial Engineering Journal, Vol. XIV & Issue No.02 pp 5-9 February - 2021

(ii)

Enhancement of productivity in an iron and steel re-rolling mill using TPM approach, Industrial Egg. Journal Vol. X Issue 3 pp 5-10 March-18

(iii)

Green Mfg. practices in SME’s of India-A Literature review Industrial Egg. Journal Vol. X Issue 3 pp 5-10 March 18

(iv)

Automation of visual inspection using image processing, Industrial Egg. Journal vol. X Issue 2 pp 9-14 Feb. 18

(v)

Job Evaluation in PCV pipe Manufacturing Company -A Case Study Industrial Egg. Journal Vol. X Issue 1 pp 10-16 Jan. 18

(vi)

Unknowingly Accepting health Hazards in Daily Routine Life, a Survey in Small Town of Madhya Pradesh”, Industrial Egg. Journal Vol. X Issue 6 pp 29-33 June 17

(vii)

“Use of Personal Protective Equipment for Safety- A Case Study of a Leading Pump Manufacturing Industry” Industrial Engineering Journal, Vol 9 No.7, July 2016 pp 17- 22.

(viii)

“Use of Personal Protective Equipments for Safely – A Case Study of a Leading Pump Manufacturing Industry” Industrial Engineering Journal, Vol. IX & Issue 7, pp 17-22, July 2016.

(ix)

“The Effect of Lean, Green, and Six Sigma Practices in SMEs of India – A Literature Review”, Industrial Engineering Journal, Vol 9 No.3 March 2016

(x)

“A review of Six Sigma Implementation Practices in Indian SMEs Particularly in State of Gujrat” Industrial Engineering Journal, Vol VIII No.4, April 2015.

(xi)

“A review of lean implementation practices in Indian SMES particularly in Gujrat”. Industrial Engineering Journal, Vol VII No.12, Dec 2014.

(xii)

“Performance evaluation of value stream analysis (VSA): A case study of a manufacturing unit”     Industrial Engineering Journal Vol VII No.10, Oct 2014,

(xiii)

“Supplier – buyer relations and human metrics affecting supply chain performance: An empirical study of Indian manufacturing organizations” Industrial Engineering Journal  Vol.38 No.3, Sept 2014.

(xiv)

“Assessment of Safety Life Cycle Model (SLC) Model to Overcome the Safety Hazards – A Case Study”                                                        Industrial Engineering Journal                April 2014.


(xv)

“Identification of Factors Affecting the Choice of Automobile in 1200 cc Passenger Car

Segment- An Empirical Study of Central India” Udyog Pragati, Vol. 36, No. 4, pp 1-11,

October - December 2012.

(xvi)

“Addressing Packaging Defects in a Chocolate manufacturing Company – A Case study”

Industrial Engineering Journal, Vol. II, No.03, March 2012, pp 25-30.

(xvii)

“A critical study of quality of health care services: Using SERVQUAL” IMT Business

Review, Greater Noida, Vol. 3, 2011, 96-104.

(xviii)

“Evaluation of End-of-Life Strategies for Certain Automobile Components Using ELSEIM Model” Industrial Engineering Journal, Vol. II, No.25, July 2011, pp 31-36.

(xix)

“Prioritizing Cleaner Production Strategies and Sub Strategies for Certain Automobile Component Categories Using AHP – A Case Study” (Received Best Case Study Award) Industrial Engineering Journal, Mumbai, Vol. II No.7, pp 41-45, January 2010.

(xx)

“An Investigation of Customer Awareness with Reference to Green Marketing of

Automobiles: An Empirical Study Conducted at Indore, MP” Indian Journal of

Marketing, New Delhi Vol. XXXIX, No. 09, pp 11-21 September 2009.

(xxi)

“Assessment of Environmental Impact and Prioritizing DfE Strategies for a Sports

Utility Vehicle - A Case Study”, Journal of Indian Institution of Industrial Engineers,

Mumbai, Vol.36. No.11, pp 8-15, November 2007.

(xxii)

“An Assessment of Environmental Impact and Determination of Optimal DFE Strategy

for Automobile Components-A Case Study” Udyog Pragati, Vol.30 No.1 pp 34-47,

Jan-Mar 2006.

(xxiii)

“Online Customer Management – Issues and Challenges in Changing Scenario” SRM

Management Digest, April 2005 Vol.3 pp 27-29.

(xxiv)

“Integrated Product Policy: An Emerging Trend for Sustainable Development - A

Review” SRM Management Digest, pp 35-48, April 2004.

(xv)  Sand, Y., and Thakar, G., (2023), “Implementation of Lean Principles in a Furniture and Household Appliances Renting Company with reference to Sofa Manufacturing: A Case Study”, Industrial Engineering Journal, XVI (8), pp.05-14 [Indexing: UGC-Care List]

(II)    International/National Conference Publications

(a)

International Conferences (22):

(i)

Elimination of Non- Value-Added Activities in Assembly Line at Cummins Turbo Technology, Pithampur” 5th ICIE Conference, pp 357-372, ISBN 978-93-86238-81-8, December 12-14, 2019.

(ii)

“A study of the association of lean manufacturing Implementation and safety in a pump manufacturing company: A case study” 4th ICIE, conference pp 970-975 - 2017 ISBN 978-93-86238-39-9 Dec. 17

(iii)

“Integrated Approach for Job Scheduling in a Production System 4th ICIE, conference”, pp 350-353 -2017 ISBN 978-93-86238-39-9 Dec. 17


(iv)

“Identification of Critical Success Factors of Lean, Green and Six Sigma Practices in SMEs of Gujrat – An Observation from Pilot Study” Proceedings of ICIE 2915, SVNIT Surat. ISBN: 978-93-84935-56-6, November 26-28, 2015.

(v)

“Influence of External Supply Chain on Supply Chain Performance: A Structural Equation Modelling Approach” , Proceedings of ICIE 2915, SVNIT Surat. ISBN: 978-93-84935-56-6. November 26-28, 2015.

(vi)

“Supplier Selection and Evaluation in Automobile Industry: Application of AHP Approach”, 2nd International Conference on Industrial Engineering (ICIE 2012), Surat,

Nov.20-22, 2013.

(vii)

“Application of Grey Relational Analysis (GRA) to Material Selection for Sustainable Product Design: A multi–Attribute Decision Making (MADM) Approach” 2nd International Conference on Industrial Engineering (ICIE 2012), Surat, Nov.20-22, 2013.

(viii)

“Design of an Optimal Kanban System: Case Study of a Mixed Model Assembly Line”, 2nd International Conference on Industrial Engineering (ICIE 2012), Surat, Nov.20-22, 2013.

(ix)

“An Empirical Study of Supply Chain Performance of Indian Manufacturing Organizations”, 2nd International Conference on Industrial Engineering (ICIE 2012), Surat, Nov.20-22, 2013.

(x)

“End of Life Management of Cell Phones in India”, 55th National Convention of Indian Institution of Industrial Engineering & International conference on "Managing Supply Chain for Global Competitiveness”, Nagpur October 25- 26, 2013.

(xi)

“Enhancement of Customer Satisfaction by QFD in Bus Service”, International Conference on Advances & Development in Engineering & Technology, ISBN: 978-93-81693-88-8, 8th Feb.2013, Indore.

(xii)

“Recycling   of    End-of-Life   Vehicles   in   Indian   Scenario”,    International Conference on Industrial Engineering (ICIE-2011), Surat, Nov.17-19, 2011.

(xiii)

“Comparative Study between Public Sector and Private, Sector Banks using Quality Function Deployment”, International Conference on Industrial Engineering (ICIE-2011), Surat, Nov.17-19, 2011.

(xiv)

“Automobile Solid Waste in the Indian Scenario - A Survey of End-of-Life Vehicles”,

International Conference on Solid Waste Management (IconSWM-2011), Nov. 9-11,

2011, Kolkata.

(xv)

“Elimination of Consumer Complaints of packaging in a Leading Confectionary Unit”,

ICOQM – 10, 10th International Conference on Operations and Quantitative

Management, Nasik / June28-30, 2011.

(xvi)

“Determination of Environmental Impact of Various End of Life Strategies for Cylinder Head of a Petrol Engine Using ELSEIM and Eco-Indicator 99” , Indo-US Workshop on

Designing Sustainable Products, Services and Manufacturing Systems, IISc Bangalore

/ August 18-20, 2009.


(xvii)

“Systems-Approach to Orientation and Training – Key to Organization Effectiveness”, ICPQR-2005, International Conference, IIT Delhi/December

12-15, 2005.

(xix)

Rohit, K., Sharma, A., and Thakar, G., (2023), “Determination of Critical Success Factors affecting the Development of Clusters in Indian Context: An Empirical Investigation”, “Proceedings of the 38th National Convention of Mechanical Engineers”, Visvesvaraya National Institute of Technology (VNIT) Nagpur (MH, India)

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:

1.   List of Conferences/Workshops/Seminars Organized

1. Co-Coordinator: National Workshop on “Product Life Cycle Engineering and Management”, held at SGSITS, 12-13 Sept., 2007.

2. Member organizing Committee: “E-Foundry Workshop” held in the IPE Department of SGSITS, Indore on August 3, 2013.

3. Coordinator for STTP on “Research methodology” during 26-30 June 2018.

4. Worked as a committee member in COPEN -2019, held jointly with IIT Indore during December 12-14, 2019.

5. Member of organizing committee of SAE India, Western Section Student Convention 2021.


2.  Invited Lectures/Expert Talks/Chairmanships at Conferences

Invited Lectures/Expert Talks

(i)   

Delivered a Talk at IEI, Indore Chapter on “Sustainable Product Design” on April 14, 2017 (T.N. Kutumbale Memorial Lecture).


(ii)

Delivered an Expert Talk on “Sustainable Product Design” during STTP on New Trends in Industrial Engineering (NTIE 2016), organized by Mechanical Engineering Department SVNIT, Surat during July 1- 5, 2016.

(iii)

Delivered an Expert Talk on “Product Design for Environment” during STTP on organized by Mechanical Engineering Department MANIT, Bhopal on May 25th 2014.

(iv)

Delivered a Talk at Institute of Engineering and Technology, DAVV, Indore on “Green Engineering”, during PHOENIX-09.

(v)

Delivered an expert lecture on 29th March, 2013 at UEC, Ujjain in one day National Seminar on “Quality Management in Technical Education”, on the topic “Quality of Technical Education in India: A State of the Art”.


3.  Session Chair/Committee Member in Conferences:

(i)    Chaired a session on “S5 (Industrial Engineering and System Design) Track” on March 5, 2021 between 3to 4.30 PM, in the International Conference on “Innovations in Product, Process and System Design (ICIPPSD – 2021)”
(ii)   Member National Advisory Committee, in the International Conference on “Innovations in Product, Process and System Design (ICIPPSD – 2021)” March 05-06, 2021, held online by Department of Mechanical Engineering, Shri Vaishnav                      Vidyapeeth Vishwavidhyalaya, University Indore.
(iii)  Member, Organizing Committee, ICIE 2019, December 12-14, 2019, SVNIT Surat
(iv)  Chaired two Technical Sessions in COPEN-2019, jointly held at IIT Indore during December12-14, 2019.
(v)  Member, International Advisory Committee of 4th International Conference in Industrial Engineering – Digital India, Smart India, make in India: Innovative Role of Industrial Engineering Organized by Department of Mechanical Engineering,               SVNIT, Surat during December 21-23, 2017.
(vi) Chaired a Session on the 4th International Conference in Industrial Engineering (ICIE 2017), held at SVNIT, Surat during December 21-23, 2017.
(vii) Member, International Technical Committee of 59th National Convention of IIIE and International Conference on “Manufacturing and Industrial Engineering (ICMIE – 2017)”, held at MGM’s Jawaharlal Nehru Engineering College, Aurangabad,          during September 14-16, 2017.
(viii) Chaired a Session on the 3rd International Conference in Industrial Engineering (ICIE 2015), held at SVNIT, Surat during November 26-28, 2015.
(ix) Member, International Advisory Committee of 3rd International Conference in Industrial Engineering (ICIE 2015), held at SVNIT, Surat during November 26- 28, 2015.
(x) Chairman, Technical Advisory Committee, International Conference on “Humanitarian Engineering Practices in Fire, Industrial Safety & Disaster Management (HEFSD 2024)“ being organized in between 5th to 7th March, 2024
(xi) Session Chair, International Conference on “Humanitarian Engineering Practices in Fire, Industrial Safety & Disaster Management (HEFSD 2024)“ being organized in between 5th to 7th March, 2024

 
4. Hon. Secretary at Indian Institution of Industrial Engineering (IIIE), Indore Chapter for the Session: 2023 - 2024
5. Faculty Advisor, mBaja (SAE India) from 2019 to 2024 (till now)
6. Chairman, SAE India, Indore Division and Member, NATRAX Technical Committee from 31-05-2024 up to 2 Years Term

Dr. M. D. Dandekar

  • Designation:  Professor
  • Employee ID: 292
  • Qualification:  Ph.D.
  • Date of Joining: 14/07/2005
  • : 0731-2582374
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
Education and Qualification:

No.

Degree

Year

University/Institute

Specialization

1.

Ph. D.

2008   Devi Ahilya Vishwavidyalaya/IET, INDORE  Mechanical Engineering

2.

M.Tech.

2002  RGPV, BHOPAL/ SGSITS, INDORE              Industrial Engineering & Management.   

3.

B.E.

 1982  Devi Ahilya Vishwavidyalaya /SGSITS, INDORE  Mechanical Engineering

4.

LL.B. (Hons)   2011  Devi Ahilya Vishwavidyalaya, INDORE  N.A.
Work Experience:
Sr. No. Duration Post Qualification required     Nature of work        Institution / department
1 Jul 2011 till date Professor Ph.D. Teaching -.Industrial Production Engineering   Department of IPE, SGSITS,Indore
2 Jul 2008 to Jul 2011
Associate Professor Ph.D. Teaching -.Industrial Production Engineering   Department of IPE, SGSITS,Indore
3 Jul, 2005  to July,2008 Reader M.E. Teaching -.Industrial Production Engineering   Department of IPE, SGSITS,Indore
4 Jan, 2001 to July, 2005 Lecturer (Now changed as Asst. Professor)     M.E. Teaching -.Industrial Production Engineering   Department of Mechanical Engineering,IET,DAVV, Indore
Research Details:
Research Area    
  • Grinding and Unconventional Machining,
  • Ergonomics
  • Intellectual Property Rights,
  • Arbitrations,
  • Technical Intervention in Tribal Management.
PhD Supervision: Ph. D. Scholar  Guidance:  2 Ph.D. Completed and awarded.
Publications:
(I) International/National Journal Publications


1.   “Identification of Strength and Weaknesses of Indian Manufacturing SMEs using AHP approach” International Journal for Quality Research, Serbia. Vol. 4,No.4, pp:263- 269,Nov. 2010 (ISSN 1800-6450)
2. A SWOT Analysis of Small & Medium Scale Enterprises Implementing TQM International Journal of Business, Management & Social Sciences, Vol.1 No.1 2010,pp 59-64
3. “Study of SMEs for TQM Implementation - SWOT Analysis” International Journal of Engineering and Industrial Management, Portugal, Dec. 2010,pp 169-177 (ISSN -1674-578X)
.4. “Green Supply Chain Management Conceptual Basis and Current Status” International Journal of Computer Application in Engineering Technology & Sciences,Oct.2010,pp 223-228,(ISSN 0974-3596)
5. “Framework of TQM Implementation – in Small Business of an Industrially Backward Region: A Concept”. Wiely Online Library, Performance Improvement, Vol. 51 No.7,Aug.2012, pp 7-13. DOI-10.1002/pfi 21280
6. “Identification of Important Factors for Implementation of TQM in Indian SMEs in context of Vidarbha & Khandesh Region International Journal of Management & Enterprise Development, Vol.12, No.4/5/6 2013 Copyright Inderscience
7. “Effect of modifying dressing parameters on plunge grinding for crankshafts” Industrial Product Finder, Vol. 34, No.04, Jan. 2006, pp.419-
8. “Selection of grinding wheel Grit-Grade matrix approach”” Manufacturing Technology & Research-An International Journal ISSN No.0973-0281 pp.60-63 Vol.2 No.1&2 Jan-June 2006
9. “Effect of operating parameters on tool cost in crankshaft grinding” Industrial Product Finder, Vol. 34, No.09, June. 2006, pp.349-
10.   “Selection of grinding wheel in precision grinding & mechanics of grinding wheel wear” Manufacturing Technology & Research-An International Journal ISSN No.0973-0281 pp.82-85 Vol.3 No.3&4 July-Dec 2006
11. “Analysis of Quality Award Model for achieving TQM” Industrial Engineering Journal ISSN-0970-2555, Vol.-II No.12, pp 17-20, June 2010
12. “Implementation of TQM components in small & medium scale industries-An AHP approach” Industrial Engg. Journal ISSN-0970-2555, Vol.-II No.23, pp 36-40, May 2011
13. “Selection of grinding wheel abrasive using MADM methods”. Industrial Engineering Journal ISSN-0970-2555, Vol.-II No.29, pp 31-40, November 2011
14. “ Techniques to optimize The supply chain in Reverse Logistics” Industrial Engineering Journal, ISSN-0970-2555, Vol.-II No.12, pp 4-10, vol. June 2010.
15. “Application of Value Stream Mapping for Identification & Elimination of Wastes in Process Industry in Indian Conditions” Industrial Engineering Journal, ISSN-0970-2555, Vol.-V No.11, Nov. 2012,.

Technical Papers –International /National Conferences

 1. “TQM, Quality Award Model & ISO 9000 Certification: Concept & Analysis” National Conference on Advance Manufacturing Techniques NCAMT-2009
 2. “AHP based study of TQM Implementation Factor” National Conference on Recent Trends in Mechanical Engineering-2010
 3. “Mapping the Current State Value Stream : Case Study of Manufacturing Unit” National Conference on Recent in Engineering Challenges for Sustainable Business,2012
Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:

 

List of Conference/Workshops Organized

(i)             

Winter School on “Recent Trends in Industrial & Production Engineering”

SGSITS ,Indore.   10-14 Sept.,2008

(ii)

One day Workshop on Intellectual Property Rights on 16/03/2017 at SGSITS Indore                                                   

 

List of  Seminars  / Workshops/Summer/Winter Courses Attended                                                                               

(i)             

“ Industrial Productivity Improvement through Innovative Techniques”

17/06/2002 to 30/06/2002 at NIT, Jamshedpur (The then RIT)

(ii)           

“Advances in CAD/CAM/CAE”01/07/2002 to 12/07/2002 at S.G.S.I.T.S.,Indore

(iii)          

“Micromachining” 18/06/2007 to 23/06/2007 at IIT Kanpur.

(iv)          

“Micromachining” 02/06/2008 to 07/06/2008 at IIT Bombay.

(v)           

“Advance Training Course on IPR Patents” 22/06/2009 to 26/06/ 2009 at NIIPM, Nagpur

(vi)          

“Advances in Manufacturing & Micromachining Techniques”14/11/2011 to 18/11/ 2011 at VJTI, Mumbai.

(vii)         

“Heat Transfer”  29/11/2011 to 10/12/ 2011 at IIT Bombay.

(viii)       

“Introduction to Research Methodology” 25/06/2012 to 04/07/2012 at IIT Bombay.

(ix)          

“Aakash for Education” 10/11/2012 to 11/11/2012 at IIT Bombay.

(x)           

Unnat Bharat Abhiyan work shop 2 days at National Institute of Rural Development, Hydrabad.

11.

Invited Lectures/Talks Delivered

(i)

IIT Bombay.Mumbai-Guest Lecture, Social Engineering and Water Shed Development in Tribal district of Jhabua ( M.P.),Aug.1,2008

(ii)

VJTI Mumbai,- STTP, Intellectual Property Rights,Feb.19,2009

(iii)

VJTI Mumbai –STTP, Intellectual Property Rights,Nov.16,2011

(iv)

VJTI Mumbai- Expert,Doctoral Consortium,Jan,11,2013 

(v)

VJTI Mumbai -AICTE Conference, Session Chaired in “Challenges & Opportunities for Prod.& Ind. Engineering”,Jan,16,2014 

Dr. A. Dalpati

  • Designation:  Professor
  • Employee ID: 245
  • Qualification:  Ph.D.
  • Date of Joining: 29/03/1995
  • : 0731-2582371
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Dr Avadhesh Dalpati joined the department in 1995 as Lecturer in the institute. He is currently Professor and Head of the department, Earlier, he has been associated with Department of Management Studies (DOMS) as the HOD since its inception till 2020 in the Institute. He received his Master of Engineering in Industrial Engineering and Management from Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal. He has earned PhD degree from Indian Institute of Technology Roorkee in the area of supply chain management. He has about 25 years of teaching and research experience at SGSITS, Indore. He has the rich experience of administrative responsibilities such as Chief Warden - Hostels, Co-ordinator-PG Admissions, Member- Career Advancement Commtt. in the institute.He is member in editorial boards of reputed national and international journals. He has successfully guided 03 PhD scholars. He has published more than 50 research papers in various national and international journals and conferences.
Education and Qualification:

S. No.    

Degree      

Specialization

Year

University/Board

1

PhD

Supply Chain Management

2011

IIT Roorkee

2

M.E.

Industrial Engineering & Management      

2002      

RGPV, Bhopal/SGSITS Indore MP     

3

B.E.

Industrial and Production Engineering

1994

DAVV, Indore/ SGSITS Indore MP

Work Experience:

S. No.

Designation

Department

Employer

Duration

1

Professor

Industrial & Production Engg.

SGSITS, Indore

29.03.2012 till date

2

Associate Professor      

Industrial & Production Engg.               

SGSITS, Indore                      

29.03.2006 to 29.03.2009

3

Reader

Industrial & Production Engg.

SGSITS, Indore

29.03.2003 to 29.03.2006

4

Lecturer

Industrial & Production Engg.

SGSITS, Indore

29.03.1995 to 29.03.2003               
Research Details:
  • Supply Chain Management,
  • Production and Operations Management,
  • Knowledge Management,
  • Industrial Engineering.
Publications:

1.       Research Paper Publications

(I)      International/National Journal Publications

1.      Chandak A., Kumar N., Dalpati A. (2020), ‘Impact of ––Supply Chain Strategy on Supply Chain Performance: A Structural Equation Modeling in the context of Small Scale Indian Automobile Industries’, International Journal of Scientific & Technology Research, Vol. 09, Issue-01, ISSN 2277-8616.

2.      Birasnav M, Mittal R.,, Dalpati A. (2019), ‘Integrating Theories of Strategic Leadership, Social Exchange, and Structural Capital in the Context of Buyer-Supplier Relationship: An Empirical study’, Global Journal of Flexible Systems Management,

3.      Chandak  A.,  Kumar  N.,  Dalpati  A.  (2019),  ‘Statistical  Analysis  of  Impact  of  Strategy  & Flexibility  on  Supply  Chain  Performance  in  the  Perspective  of  Indian  Automobile Manufactures’,  International  Journal  of  Innovative  Technology  and  Exploring  Engineering, Vol.-09, Issue-01, ISSN: 2278-3075.

4.      Chandak A., Chandak S., Dalpati A. (2019), ‘Analysis of the Impact of Supply Chain Flexibility on  Supply  Chain  Performance:  An  Empirical  Study  in  the  Indian  Automotive  Industry’ Industrial Engineering Journal, Vol.-12 Issue 3, ISSN:2581-4915.

5.      Chandak S., Kumar N., Dalpati A.  (2019), ‘The Impact of E-Business on Supply Chain Performance in the context of Indian Automobile Industry’, The IUP Journal of Supply Chain Management, Vol.-XVI, No.-02.

6.      Chandak A., Chandak S., Dalpati A. (2018), ‘A Study of Impact of Supply Chain Strategy on Supply Chain Performance: An Empirical Investigation on Automobile Industry in India’ Journal of Supply Chain Management System, Vol. 7 Issue-3, pp.01-07.

7.      Rai K., Lodha R., and Dalpati A. (2017), ‘Mass customization is new trend for textile industries’ International Journal of Development Research, Vol. 07, Issue-2, ISSN: 2230-9926.

8.      Chouksey A.  Dalpati, A. (2017), ‘An application of quality function deployment: a case of gymnasium’, Journal of Indian Institution of Industrial Engineering, pp. 42-49.

9.      Rai K. and Dalpati A. (2015), ‘Mass customization practices for  manufacturing industries’, International Journal of Innovations in Engineering and Technology, Vol. 06, Issue-2, pp. 234-238, ISSN: 2319 - 1058.

10.   Jauhar S., Shrivastava K., and Dalpati A., (2012), “Third party logistics practices in south-asian countries: A comparative analysis”, Advances in Mechanical Engineering and its Applications (AMEA), Vol. 2, No.3, pp. 174-180.

11.   Sadhwani S., Sohani N., and Dalpati A., (2011), “Supply chain optimization: A case of diaper industry”, International Journal of Business and Technology Research Vol.4, No.1, pp.1391-1398, 2011.

12.  Birasnav, M., Rangnekar, S., and Dalpati, A., (2011), "Transformational leadership and human capital benefits: the role of knowledge management", Leadership & Organization Development Journal, Vol. 32, No. 2, pp.106-112, 2011.

13.   Dalpati A., Rangnekar S., and Birasnav M, (2010), "Knowledge management and supply chain flexibility performance in Indian manufacturing industry: An Empirical Study”, Global Journal of E-Business & Knowledge Management, Vol. 6, No. 1, pp.10-16, Dec 2010 Issue, 2010.

14.   Birasnav M., Rangnekar S., and Dalpati, A., (2010), “Transformational leadership, interim leadership, and employee human capital benefits: an empirical study”, Procedia – Social and Behavioral Sciences Journal, Vol. 5, pp. 1037-1042, 2010.

15.  Birasnav  M., Rangnekar S., and Dalpati, A., (2010), “Enhancing employee human capital benefits through investment in knowledge management: a conceptual model”, Global Journal of E-business & Knowledge Management, Vol. 5, No. 1, pp. 20-26, 2010.

National Journals:

16.  Shrivastav P., Dalpati A., Singh A.K., and Goyal M.D., (2013), ‘Dynamic response of corrugated panels under blast loading’ CSVTU Research Journal, Vol.6, pp.38-42.

17.  Dalpati A. and Rangnekar S., (2008), ‘Knowledge management implementation at BHEL, Haridwar: a case study’ The Journal of Army Institute of Management (KINDLER), Vol. 8, No. 2, pp. 27-34, 2008.

18.  Khan S. and Dalpati A., (2012), ‘Material handling Safety Measures’ Chemical Engineering World, Vol.47, No.11, pp.50-53, Nov.’12 Print, 2012.

 

(II)    International/National Conference Publications

1.      lalwani P. and Dalpati A., (2021), “Analysis of Barriers of Lean Manufacturing using Interpretive Structural Modelling in Indian Context” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

2.      Choubey N.K. and Dalpati A., (2021), “Productivity Improvement of Assembly Line Through Value Stream Mapping: A Case Study” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

3.       Satyam Tiwari, Gupta. R.C., and Dalpati A., (2021), “Determination of Marketing Strategy for a Logistics Company: An Analytic Hierarchy Process Approach” in the proceedings of the International Conference on Innovations in Product, Process and System Design (ICIPPSD-2021) at SVITS, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, 05-06 March.

4.      Chouksey A., Dalpati, A., and Agrawal P., (2017), “Productivity Study of Engine Assembly Line  using  MOST:  A  Case  Study”  in  the  proceedings  of  4th  International  Conference  on Industrial Engineering (ICIE-2017) at SVNIT Surat, 21-23 Dec.

5.      Chandak A., Chandak S., and Dalpati A. (2017), “Impact of Supply Chain Strategy Dimensions on  Supply  Chain  Performance  Dimensions:  An  Empirical  study  in  the  Indian  Automotive Industry” in the proceedings of 4th International Conference on Industrial Engineering (ICIE-2017) at SVNIT Surat, 21-23 Dec.

6.      Chandak S., Chandak A., and Dalpati A. (2017), “Impact of Goods and Services Tax (GST) on Supply  Chain  in  India”   in  the  proceedings  of  4th International Conference on Industrial Engineering (ICIE-2017)  at SVNIT Surat, 21-23 Dec.

7.      Chouksey A. and Dalpati, A., (2017), “Sustainable Management of Water in Indian Context” in the  proceedings  of 4th International  Conference  on  Research  &Business  Sustainability  (ICRBS-2017) at IIT Roorkee, 16-17 Dec.

8.      Rohit K., Rathaur G., and Dalpati, A., (2017), "Assessing the Effectiveness of Value Stream Analysis towards the Lean Improvements: An Application-based Approach" 2017 in the Proceedings of The POMS 28th Annual Conference, Seattle, Washington, U.S.A.

9.      Dutta  D.,  Dalpati  A.,  and  Rohit  K.  (2016),  “Analysis  of  Bullwhip  Effect in Overstock and Understock Situations: A Review” in the proceedings of  International Conference on E-Business and Supply Chain Competitiveness (EBSCC-2016) at IIT Kharagpur, pp. 491

10.   Badgujar P., Bhagat A., and Dalpati A. (2015), “A study on Status of Logistics Infrastructure in India”, in the Proceedings of the 4th International Conference on Sustainability and Manufacturing Strategy (ICSMS-2015), held at Institute of Management Technology, Nagpur, Maharashtra, 4-5 Sept.

11.   Jain  N.,  Thakar  G.,  Dalpati  A.,  and  Rohit  K.(2013), “Supplier Selection and Evaluation in Automobile Industry: Application of AHP Approach”, in the Proceedings of The International Conference on Industrial Engineering (ICIE2013) 20-22 Nov., SVNIT Surat, Gujarat, pp.204-208, ISBN- 978-93-83083-37-4. Excellent Publishing House, 2013.

12.   Shah P.K., Pradhan A., Dalpati A., and Gupta R.C. (2013), “Assembly Line Balancing Heuristic Approach: A Case Study” in the Proceedings of The Second International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM), 16-18 Dec. 2013, IIT Indore. pp. ©Emerald Group Publishing Limited, 2013.

13.    Goel, M.D., P. Shrivastava, A. Dalpati and A.K. Singh (2013), “Dynamic Response of Corrugated Panels under Blast Loading”, In the Proceedings of International Conference on Advances in Mechanical Engineering (ICMAE-2013), 29-31May 2013, College of Engineering Pune, Maharashtra, India, 2013.

14.    Rohit  K.,  Rathaur  G.,  and  Dalpati,  A.,  (2012), “Effectiveness of the Seven Value Stream Mapping (VSM) Tools towards Lean Improvement: Case Study of a Manufacturing Unit”, Proceedings of the XVI Annual International Conference of the Society of Operations Management (SOM 2012)”, DMS, IIT Delhi (India), Vol.1, pp. 450-458, 2012.

15.   Shrivastava K., Jauhar S., and Dalpati A., (2012), “No winner in labour strike: A case study” in the proceeding of sixth PIMR International Conference on Business Innovations and Enterprenuership: Transforming World Economy at PIMR Indore, 11-12 Feb, 2012.

16.   Jauhar S. and Dalpati A., (2011), “Cost reduction through value analysis in galvanization process” in the proceeding of International Conference on Industrial Engineering (ICIE 2011) at SVNIT Surat, 2011.

17.   Kamlekar N., Gupta R.C., and Dalpati A., (2012), “Implementation of Assembly Line Balancing in a Labour Intensive Manufacturing Unit”, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1772-1783, ISBN - 978-93-81583-46-3, 2012.

18.    Rathaur G., Kumar R., Dandekar M., and Dalpati A., (2012), “Mapping the Current State Value Stream: Case Study of a Manufacturing Unit “, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1772-1783, ISBN - 978-93-81583-46-3, 2012.

19.   Diwakar G.K., Dalpati A., and Gupta R.C., (2012), “A Survey on 3PL practices in Manufacturing Industries”, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1584-1597, ISBN - 978-93-81583-46-3, 2012.

20.   Khan S. and Dalpati A., (2012), Study of Material Handling Safety Measures in Chemical Industry, In the Proceedings of National Conference on Emerging Challenges for Sustainable Business, at DOMS, IIT Roorkee, pp.1838-1846, ISBN - 978-93-81583-46-3, 2012.

21.   Dalpati A. and Rangnekar S., (2011), “Supply chain flexibility performance in Indian manufacturing firms” Paper presented at National Conference of Research Scholars in Management (NCRSM-2011) at ABV-IIITM, Gwalior, 2011.

22.    Sadhwani S., Sohani N., and Dalpati A., (2011), “Supply chain optimization: A case of diaper industry”, in the proceedings of International conference on managing excellence for emerging global paradigm in business and technology at CHIMC, Indore, 2011.

23.   Dalpati A., Rangnekar S., and Birasnav M, (2010), ‘Knowledge management and supply chain flexibility  performance  in  Indian  manufacturing  industries:  an  empirical  study’  in  the proceedings of Tenth Global Conference on Flexible  Systems Management (GLOGIFT’10) at Keio University, Japan.

24.    Dalpati A. and Rangnekar S., (2008), “Integrating Knowledge Management Fundamentals with Theory of Constraints”, Paper presented at International Conference on Management (INCOM) at MLS University, Udaipur, 2008.

25.   Dalpati A. and SriYogi K., (2006), “Reverse Logistics: a Forgotten Child of Supply Chain”, in the proceedings of National Conference on Advances in Mechanical Engineering, (AIME-2006), Jamia Millia Islamia, NewDelhi, Jan 20-21, 2006.

26.   SriYogi K., Dalpati A., Gupta R.C., and, Gupta R., (2006), “Mass Customization: Implications of IT”, In the proceedings of International Conference on Productivity, Quality and Reliability (ICPQR), December06, IIT Delhi, 2006.

27.   Dalpati A. and Prasad R.M., (2006), “Intelligent Supply Chain Management”, in the proceedings of International Conference on Productivity, Quality and Reliability (ICPQR), December06, IIT Delhi, 2006.

28.   SriYogi K., Dalpati A., and Gupta R.C., (2006), “Supply Chain Production Planning in Mass Customization Environment”, in the proceedings of National Conference on Advances in Mechanical Engg., March06, Engg. College Kota, Rajsthan, 2006.

29.   SriYogi K., Dalpati A., and Gupta R.C., (2006), “Role of Data in Managing Information System”, National conference on Information and Emerging Technologies, February06, IET Ropar, Bhaddal, 2006.

30.   Jain K.C., Jain S., Verma P.L., and Dalpati A. (2005), “Process Capability Index: A Measure of Six Sigma System”, in the proceedings of Fifth Global Conference on Flexible Systems Management (GLOGIFT’05) 27-30 December, RGPV, Bhopal, MP, 2005.

 

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mr. Shailendra Purohit

  • Designation:  Associate Professor
  • Employee ID: 140
  • Qualification: M.E.
  • : 0731 2582521
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Myself Shailendra Purohit I have around 34 years of experience in teaching, administration and research, guiding students in their studies, career building, counselling and solving their problems personal and professional both.  I'm Superintendant Central Workshop, of the institute and look after various activities performed in Workshop for all the departments across the Institute. In my spare time,  I like reading spiritual books and practice meditation.    I define myself as a spiritual person and I am a part of Sahaj Marg and practicing meditation for more than 30 yrs. which helps me to grow as an individual and helps me in my teaching profession as well. 
Education and Qualification:
  S No. 
  Degree   
Specialization   Year 
University 
 1.  
 M.E.
Industrial Engineering and Management
 1999 
 SGSITS, Devi Ahilya University, Indore
2.  B.E. Mechanical Engineering  1983  Govt Engg College Ujjain, Vikram University, Ujjain
Work Experience:
S.No.DesignationDepartmentInstitute/Organization
Duration
 1. Associate Professor Industrial Engineering & Production  SGSITS, Indore  Sept 1999 – till date
2. Lecturer Industrial Engineering & Production SGSITS, Indore 31st Aug 1987 to Sept 1999
3. Supervisor Industrial Engineering  NewPrecision India Ltd. Dewas Jan 1984 to July 1987
Research Details:
S.No.TypeTitleYear
 1      
Publications:
S.No.TypeTitleYear
 1      
Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mr. F. Ujjainwala

  • Designation:  Associate Professor
  • Employee ID: 9157
  • Qualification: M.Tech.
  • Date of Joining: 22/12/2003
  • : 0731-2582377
  • :This email address is being protected from spambots. You need JavaScript enabled to view it.
  • :Detailed Profile
About Faculty: I have more than SEVENTEEN years of experience in teaching, serving at top institutes including SVNIT Surat and SGSITS Indore. Apart from teaching, I have around SIX and HALF years of experience in software industry as software developer and system analyst and team leader. As programmer and team leader. I played an active role in development, implementation, maintenance and testing of various CAD/CAM & ERP applications.
Education and Qualification:

S. No.

Degree

Specialization

Board/University

Year

1

Ph. D. (pursuing)

Lean Manufacturing

IET, Devi Ahilya Univ Indore

2

M. Tech.

Mechanical Engg (CIM)

Indian Institute of Technology, Madras

1996

3

B. E.

Industrial & Production Engg

SGSITS, Devi Ahilya Univ Indore

1993

Work Experience:

S. No.

Post/Designation

Institute/Organization

From

Till

1

Associate Professor

SGS Institute of Tech. & Science Indore

Dec 2016

till date

2

Assistant Professor (stage III)

SGS Institute of Tech. & Science Indore

Dec 2013

Dec 2016

3

Assistant Professor (stage II)

SGS Institute of Tech. & Science Indore

Dec 2008

Dec 2013

4

Assistant Professor (stage I)

SGS Institute of Tech. & Science Indore

Dec 2003

Dec 2008

5

Lecturer (contract)

SGS Institute of Tech. & Science Indore

July 2003

Dec 2003

6

Lecturer(adhoc)

SV National Institute of Technology Surat

Aug. 2002

June 2003

7

SSA and Project Manager

Qtech Solutions, Bangalore

Jan. 2002

July 2002

8

System Analyst (SA)

Satyam Computer Services, Bangalore

Aug. 2000

Jan. 2002

9

Senior Software Engineer

Patni Computer Systems, Pune

March 1997

July 2000

Research Details: Research Interest :
  1. Industrial Engineering
  2. Lean Manufacturing
  3. CAD/CAM and Manufacturing Automation
Publications:
Ujjainwala F., A. Petare, “Tool management problem in cellular manufacturing (FMS) using analytical hierarchy process (AHP)”, Review of Business & Technology Research, Vol 2, No. 1, 2009, pp 1-8, ISSN 1941-9414, MTMI Maryland University, USA.

Shawrikar M., F. Ujjainwala, M. Dandekar, “Selection of Grinding Wheel Abrasive using MADM Methods”, Industrial Engineering Journal, Vol II Issue 29, Nov 2011, pp 31-39, ISSN 0970 2555

Applications of Value Stream Mapping for identification & elimination of wastes in process industry in Indian conditions”, Industrial Engineering Journal, Vol II Issue 29, Nov 2012 Pg 15- 22, ISSN 0970 2555

“Productivity Improvement through Line Balancing on Stitching Line in a footwear industry”, Industrial Engineering Journal, Oct 2013, Pg 14- 19, ISSN 0970 2555

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mr. M. D. Mahajan

  • Designation:  Associate Professor
  • Employee ID: 58
  • Qualification: M.E.
  • Date of Joining: 27/08/1985
  • : 0731-2582371
  • : mmahajan@sgsits,ac,in
  • Detailed Profile
Education and Qualification:

No.

Degree

Year

University/Institute

Division

Specialization

2.

M.E.

1989

SGSITS

DAVV, Indore

First

Industrial Engineering & Management.

1.  B.E. 1984 GEC , Ujjain First Mechanical Engineering
Work Experience:
Sr. No. Duration Post Qualification required Nature of work Institution / department
1.

09/10/1998

Associate Professor M.E. Teaching -.Industrial Production Engineering   Department of IPE, SGSITS,Indore
2. 27-8-1985 (Asst. Professor) M.E. Teaching -.Industrial Production Engineering   Department of IPE, SGSITS,Indore
Publications:

International  and National Journals

“Extension of wire-EDM capability for turning titanium alloy and an experimental study for process optimization by grey relation analysis” Material Today proceedings, Volume 24, Part 2, 2020, Pages 966-974, 2020

“Investigation of most influencing parameter for surface roughness and mrr in AISI D3 steel alloy by using taguchi approach” Industrial Engg. Journal, Vol.XII Issue 2 pp 42-46 ISSN 0970-2555 FEB 2019

“Multi-Response parameter optimization of CNC plasma arc machining using taguchi methodology” Industrial Engg. Journal, Vol.XI Issue 12 pp 05-13 ISSN 0970-2556 DEC-2018

“Economic Analysis of grinding wheel: A case study” Industrial Engg. Journal, Vol.XI Issue 11 pp 05-13 ISSN 0970-2557 NOV 2018

“Extensive  of Wire-EDM capability for Turning Titanium Alloy and an experimental study for process optimization by grey relations analysis” Materials Today, ISSN: 2214-7853, 2018

“Quality Function Deployment A Case Study on Water Cooler” Industrial Engineering Journal, Vol. X, Issue 09, 43-46, Sept. 2017

“Comparison of modal characteristics of beam structure using analytical and finite element analysis”

Manufacturing and Renewable Energy Systems (AMMRES 2018)

978-93-86915-57-3 AUG 2018

“Cost Optimization of Engine Rocker Cover By Introducing Nylon 66 in Manufacturing”

Industrial Engg. Journal, Vol.X Issue 8 pp 37-43 ISSN Aug 2017

“Selection of Linear electric Actuators from an Automatic Manual Transmission“

NCRAME,Vol. I, pp 422-426  ISBN 978-93-86256-88-1 May 2017

“Productivity Improvement of Raw Material Handling Department in Paper Industry”

Industrial Engineering Journal, Volume IX, Issue IV. pp 18-22 April 2016

“Cost Optimization of Engine Rocker Cover By Introducing Nylon 66 in Manufacturing”

Industrial Engg. Journal, Vol.X Issue 8 pp 37-43 ISSN Aug 2017

“Selection of Linear electric Actuators from an Automatic Manual Transmission“

NCRAME,Vol. I, pp 422-426  ISBN 978-93-86256-88-1 May 2017

“Productivity Improvement of Raw Material Handling Department in Paper Industry”

Industrial Engineering Journal, Volume IX, Issue IV. pp 18-22 April 2016

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:

Membership of Professional Societies - 

Indian Institution of Industrial Engineers - -Life Member since                   

Dr. Sachin Balsara

  • Designation:  Associate Professor
  • Employee ID: 304
  • Qualification: Ph. D.
  • Date of Joining: 07/10/2006
  • : 0731-2582371
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Dr. Sachin Balsara joined the department in 2006 as Lecturer in the institute. He obtained his B.E. degree in Mechanical Engineering from SGSITS, Indore, in the year 2001 than he received his Master of Engineering in Industrial Engineering and Management from GEC, Ujjain in 2005. He has earned PhD degree from Indian Institute of Technology Roorkee from the department of Mechanical and Industrial Engineering in the area of supply chain management. He has about 15 years of teaching and research experience at SGSITS, Indore. His research interests include MCDM techniques, Climate change mitigation strategies and Supply Chain Management. He has authored or co-authored many publications, which include journal papers, conference papers, and book chapters. He has worked in the capacity of a member of many committees at the Institute level.
Education and Qualification:

Degree

Year

University/Institute

Specialization

Ph. D.

2019

IIT Roorkee, Roorkee

Industrial Engineering/SCM

M. E.

2005

Govt. Engineering College, Ujjain

Industrial Engineering and Management

B. E.

2001

SGSITS, Indore

Mechanical Engineering

Work Experience:
S.No.Designation DepartmentEmployer  NameDuration of Employment
 1. Assistant Professor Department of Industrial and Production Engineering SGSITS, INDORE 07/10/2006  till date
2. Lecturer Department of Mechanical Engineering   MIT Ujjain 01/07/2006 to 30/09/2006
3. Guest Faculty, Department of Mechanical Engineering   Govt. Plytechnic Ujjain 01/10/2001 to 30/06/2003
Publications:

 

(I)

International and National Journals

(i)

Sachin Balsara, Pramod Kumar Jain, and Anbanandam Ramesh.

An integrated approach using AHP and DEMATEL for evaluating climate change mitigation strategies of the Indian cement manufacturing industry”

Environmental Pollution, 252 (2019) 863-878, (Elsevier, SCI Journal),ISSN: 0269-7491, https://doi.org/10.1016/j.envpol.2019.05.059 , Impact Factor: 5.71

(ii)

Sachin Balsara, Pramod Kumar Jain, and Anbanandam Ramesh.

An integrated methodology to overcome barriers to climate change mitigation strategies: a case of the cement industry in India”

Environmental Science and Pollution Research, 1-25. (SCI Journal), Springer. DOI https://doi.org/10.1007/s11356-020-11566-6, Impact Factor: 3.306

(iii)

Sachin Balsara, Pramod Kumar Jain, and Anbanandam Ramesh.

"Analyzing enablers of emission reduction strategies of cement-manufacturing industry of India under fuzzy environment." Advances in Simulation, Product Design and Development. Springer, Singapore, 2020. 571-581.

(iv)

Sukhlal Mujalda, Devendra Singh Verma, Atul Modi, Sachin Balsara

An Application of Quality Function Deployment for Modular Kitchen”, International Journal of Innovative Research in Science Engineering and Technology

Vol. 4, Issue 6, June 2015, ISSN(Online): 2319-8753

(v)

Priyavrat Kumar, Sachin Balsara, V.B. Gupta

Financial Viability of A Wind Power Project in Madhya Pradesh”, International Journal of Engineering Research & Technology (IJERT)

Vol. 1 Issue 6, August – 2012, ISSN: 2278-0181

 

Technical Papers –International /National Conferences

(i)

Ronnie Chatterjee and Sachin Balsara

Sustainable Development Assessing the Performance of the Cement Industry Through Multi-Criteria Decision Making: In the Context of the Indian Cement Industry International Conference on “Innovations in Product, Process and System Design (ICIPPSD – 2021)” (05th- 06th March, 2021)” at Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, India

ISBN: 978-81-87997-52-3

(ii)

Lakshya Chugh and Sachin Balsara

Evaluating the Effect of Infill Density and Shape Geometry on the Performance of FDM 3D Printed Components, International Conference on “Innovations in Product, Process and System Design (ICIPPSD – 2021)” (05th- 06th March, 2021)” at Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore, India, ISBN: 978-81-87997-52-3

(iii)

Sachin Balsara, Pramod Kumar Jain, and Anbanandam Ramesh.

Analyzing Enablers of Emission Reduction Strategies of Cement-manufacturing Industry of India under Fuzzy Environment” 7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018, Anna University, Chennai during 13-15 December 2018

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Dr. Atul Modi

  • Designation:  Assistant Professor
  • Employee ID: 9266
  • Qualification: Ph. D.
  • Date of Joining: 07/07/2007
  •  Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Dr Atul Modi did graduation in Mechanical Engineering from Govt. Engg. College Ujjain. In 1983 he joined M/S Indore Steel & Iron Mills as Mechanical Engineer and promoted to Assistant Manager. In 1992 joined M/S Keshari Steel as Manager and in 1996 M/S Mardia Steel as Assistant Work Manager and promoted to DGM in 1968. Total 22 years Industry experience in the field of Manufacturing. In 2007 Joined SGSITS as Assistant Professor & in 2021 did PhD from RGPV, Bhopal in Manufacturing.
Education and Qualification:
 
 S. No.  Degree  Board/University Specialization  Year
 1  Ph D  RGPV Bhopal  Manufacturing Engineering  2021
 2  M. E.  SGSITS Indore (DAVV Indore)  Industrial Engg & Management  1987
 3  B. E.  GEC Ujjain (Vikram Univ Ujjain)  Mechanical Engineering  1983
Work Experience:
S. No. Designation Department Employer  Name Duration of Employment
1. Assistant Professor      Industrial & Production Engineering  SGSITS, INDORE  2007  to till date
2. Lecturer Industrial & Production Engineering  SGSITS, INDORE  2004-2007
3. Canvasser Plant Voltas, Mumbai  2001-2004
4. DGM Plant Mardia Steel, Ahmedabad   1996-2001
5. Manager RM  Plant Keshari Steel, Dewas    1992-1996
6. Engineer to Assistant Manager       Plant ISIM, Indore 1983-1992
Research Details:
Research Interests
  • Manufacturing,
  • Automation,
  • Optimization.


Publications:

     Research Paper Publications

(I)      International/National Journal Publications

1. Pollution emission control and energy optimization in mini-steel rolling processes by loss function approach-A case study. E.M. International Journal EEC. 19(4); 2013, ISSN-0971-765X.

2. ‘Critical analysis of steel wire rod processes for energy optimization –A case study’ IJIET, ISSN-2319-1058, February, Vol.  3, Issue 1, Oct, 2013.

3. Hot Charging sequences critical analysis for steel bar plant for pollution control and energy optimization, IJIET ISSN-2319-1058 Vol.  3, Issue 3, 2014.

4. ‘Development of Competitive Responsive Manufacturing System to Maximize the Energy Efficiency in Automobile Industry by Process Sequential Optimization’. IJIET Vol.  3, Issue 3, 2014.

5.‘Target oriented sequential optimization for sustainable development of Indian steel rolling plants-case studies based critical analysis’, IJFAR, ISSN-2320-7973. October, Vol.  2, Issue 7, 2014.

6. Sequential simulation of steel rolling reheating process for target oriented energy optimization, IJFAR, ISSN-2320-7973. October, Vol.  2, Issue 8, 2014.

7. ‘Pasteurization Process Energy Optimization For A Milk Dairy Plant By Energy Audit Approach’, IJSTR, ISSN-2277-8616, June, 2014, Vol.  3, Issue 6.

8. Sequential improvement of quenching -self-tempering-treatment rolling process for a modern manufacturing system-a case study, IJSTR, ISSN-2277-8616 Fab, 2015, Vol.  4, Issue 4, June 2015.

9. Convertion of rolling plant into robust plant for sustainable development by Taguchi methods, Lab to Land  Vol.  7, Issue 25, Jan-March 2015.

10. ‘Forging Plant Processes Energy Conservation by Energy Audit Approach –A case study’ IJSTR, ISSN-2277-8616, March, 2015Vol.  4, Issue 4, June 2015.

11. Mini-steel-rolling-sequence critical analysis for sustainable manufacturing-a case study, IJSTR, ISSN-2277-8616, March, 2015Vol.  4, Issue 4, June 2015.

12. An Application of Quality Function Deployment for modular kitchen. IJIRSET, ISSN-2319-8753, June, Vol.  4, Issue 6.

13. Optimum design for CMM by robust design, IJIRSET, ISSN-2319-8753, April, Vol.  4, I. 4, June 2015.

14. Drilling Process Parameter Optimization by DOE, IJSHRE, ISSN-2347-4890, ‘Volume 4 I. 5 May, 2016,

15. Verification of Trusses Formula for Number of Joints of Members, IJSRD - Vol. 4, Issue 07, 2016 | ISSN (online): 2321-0613.

16. Steel Re-Bars In-line Treatment Process Optimization by ANN-DOE Modelling, IJETAE,ISSN 2250-2459, ISO 9001:2008 Certified Journal,, Volume 7, Issue 7, July 2017.

17. “ECM Tool Performance Improvement by Pro-E software” IJETAE, August 2017, ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 7, Issue 8,

18. Roughing Rolling Performance Improvement and Energy Optimization by ANN- DOE Modeling, IJERA, ISSN : 2248-9622, Vol. 7, Issue 12, ( Part -5), pp.01-10.

19. Productivity improvement with help of automated MHS-A case study of steel rolling plant IJETAE,  September 2017, ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 7, Issue 9.

20 Press Tool Design for Hand File Manufacturing. IRJET, Volume: 06 Issue: 06 | June 2019.

21. Sequential Optimization of Rod Hot Rolling Processes with Help of Rolling Temperature, IJIRSET Volume 9, Issue 6, June 2020|.

22. QUALITY improvement in a big dia. pipe manufacturing -a case study, IRJMET, V-2, I-11, 2020.

23. Milk pasteurization processes temperature optimization with use of PID controller, IRJMET, Volume: 03/Issue:02/February-2021.

(II)    International/National Conference Publications

 

1. Design and Development of Competitive Lean Team, 16-17 Fab, 2008, MITS Gwalior.

2. Taguchi Methodology for process optimization-A Case Study, 27-28 April, 2012, B.M. College, Indore.

3. Sustainable development in mini-steel-plant by optimum hot charging system, 29th, Dec, 2015 Acropolis Indore.

4. Innovative design and layout of press tool using concept of design for manufacturing, 2015 Acropolis Indore.

5. Steel rolling plant processes energy optimization by energy audit approach –A case study, JNCT Bhopal April-5-6, 2013.

 

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:

      List of Conferences/Workshops/Seminars Organized

  • One Nos. on S.T.P. Platform on Fab-March 2021.

Mr. Sukhlal Mujalda

  • Designation:  Assistant Professor
  • Employee ID: 308
  • Qualification:  M.E.
  • Date of Joining: 03/07/2007
  • :  
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Sukhlal Mujalda obtained his B.E. degree in Industrail & Production Engineering from JEC, Jabalpur in the year 2006. He obtained his master degree in Industrial Engineering and Management from IET. DAVV, Indore. He has published 7 research papers in international journals.
Education and Qualification:

No.     

Degree     

Year     

University/Institute    

Division   

Specialization         

1.

M.E.

2015

DAVV,INDORE

Ist

I.E.M.

2.

B.E.

2006

RGPV, JEC, Jabalpur

Ist

Ind. & Prod. Engg.

Work Experience:
S.No.Designation DepartmentEmployer  NameDuration of Employment
 1.

ASSIST. WORKSHOP SUPERINTENDENT

Department of CENTRAL WORKSHOP Shri G. S. Institute of Technology and Science, Indore  2007 to till date
Research Details:

Area of Research Interest: Casting & Metal Cutting

Publications:

(I)

International  and National Journals

I

Atul Modi, Pawan Ahirwar, Praveen Trivedi, Sukhlal Mujalda,(2017)“Productivity Improvement With the Help of Automated Material Handling System- A Case Study of Steel Rolling”, International Journal of Emerging Technology & Advanced Engineering, Vol. 07,PP 184-190

II

A. Modi, Pankaj Kumar Manua, Sukhlal Mujalda(2017)“ECM Tool Performance Improvement by Pro – E Software”, International Journal of Emerging Technology & Advanced Engineering, Vol. 07,PP 94-99

III

Sukhlal Mujalda, Nirmal Ku. Uikey,(2016)“Optimize Shrinkage Defect in Corner Joint of Aluminum Alloys Sand Casting By DFM”, International Journal of Engineering and Allied  Science, Vol. 01,PP 03-06

IV

Sukhlal Mujalda, Devendra Verma,(2015)“Quality Function Deployment For Row House Construction In Real Estate”, International Journal of Science & Technology Research, Vol. 04,PP 184-190

V

Sukhlal Mujalda, Devendra Verma, Atul Modi , Sachin Balsara(2015)“An Application of Quality Function Deployment For Modular Kitchen”, International Journal of Innovation Research in  Science ,Engineering & Technology , Vol. 04,PP 4315-4323

VI

Sukhlal Mujalda, Devendra Verma,(2015)“QFD As a Tool For Improvement of Master Bathroom”, International Journal ofApplication or Innovation in Engineering and Management(IJAIEM) Science & Technology Research, Vol. 04,PP 161-167

VII

Atul Modi, Ravikant Sharma,Yogesh Jaiswal,Sukhlal Mujalda, Sujeet Pratab Singh Baghel,(2015)“Mini Steel Rolling Sequence Critical Analysis For Reinforcement Bar Production For Sustain Manufacturing- A Case Study”, International Journal of Science & Technology Research, Vol. 04,PP 165-172

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mrs. Neha Patkar

  • Designation:  Assistant Professor
  • Employee ID: 694
  • Qualification:  M.E.
  • Date of Joining: 08/10/2018
  • Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Ms. NEHA PATKAR joined the department in 2014 as Assistant professor in the institute. She obtained her B.E. degree in Industrial and Production Engineering from GEC, Jabalpur, in the year 2005. She received her Master of Engineering in Industrial Engineering and Management (IEM) from SGSITS, Indore in 2009. She has administrative responsibility such as Warden - Girls Hostels, online teaching Coordinator, PG coordinator in Department and also in counseling team , first year Section In charge and committee member of Induction program. Her research interest is Smart Manufacturing, Industry 4.0, and WITNESS Simulation Software.
Education and Qualification:

S. No.    

Degree      

Specialization 

Year

University/Board

1

ME

Industrial Engineering Management (IEM)                          

2008      

SGSITS, INDORE          

2

BE

Industrial and Production Engineering

2005

JEC, Jabalpur

Work Experience:

S. No.

Designation

Department

Employer

Duration

1

 Assistant Professor
(Regular).

Industrial & Production Engineering Department 

SGSITS, Indore

(Oct 2018 to Till date)

2

 Assistant Professor
(Contractual).

Industrial & Production Engineering Department 

SGSITS, Indore

(July 2015 to July 2017)

3

Assistant Professor

Mechanical Engineering Department

KIT, Kanpur

(July 2012 to May 2014)

4

Assistant Professor

Mechanical Engineering Department

Takshilla Institute, Jabalpur

(July 2011 to May 2012)

Research Details:

   Research Interests

  • Project Management,
  • Logistics Management,
  • Smart Manufacturing,
  • Industry 4.0,
  • Witness Software
Publications:

1.       Research Paper Publications

(I)      International/National Journal Publications

Neha Patkar , R C Gupta , M D Mahajan (2017), ‘Quality Function Deployment (QFD)- A Case Study’ Journal of Indian Institute Industrial Engineering: An open access journal, Volume (Sept 2017), Article ID AR/NO/2265/17.

 

(II)    International/National Conference Publications

1.  Reenu Masram, Ms. Neha Patkar (2021), ‘Digitalisation in Agriculture with the application of Industry 4.0’ “INNOVATIONS IN PRODUCT, PROCESS AND SYSTEM DESIGN (ICIPPSD – 2021)” organized by Department of Mechanical and Automobile Engineering, Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore.

2.  Kshitiz Rajoria, Ms. Neha Patkar (2021), ‘Prioirtization of Reverse Logistics through AHP’ “INNOVATIONS IN PRODUCT, PROCESS AND SYSTEM DESIGN (ICIPPSD – 2021)” organized by Department of Mechanical and Automobile Engineering,  Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore.

 

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Dr. Krishnakant Dhakar

  • Designation:  Assistant Professor
  • Employee ID: 699
  • Qualification: Ph.D.
  • Date of Joining: 25/10/2018
  • :  
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Dr. Krishnakant Dhakar has done his B.E. and M.E. from Jabalpur Engineering College, Jabalpur and Punjab Engineering College, Chandigarh respectively. He obtained his Ph.D. from Indian Institute of Technology (IIT) Roorkee. He has served as an Assistant Professor at NIT Bhopal and NIT Jalandhar. His research interests include Advanced Machining, Composite Materials, Optimization and Supply Chain Management. He has authored or co-authored more than 35 publications which include journal papers, conference papers, and book chapters. He has also got two patents. He has been PI/Co-PI for five projects and two consultancies. He has been the reviewer of many reputed journals. Further, he has been the guest editor of Materials Today’s. He has presented his research at USA and Japan.
Education and Qualification:

S. No.

Degree              

Specialization

Year       

University/Board            

1.

Ph.D.

Advanced Machining

2016

IIT Roorkee

2.

M.E.

Production Engineering

2009

PEC Chandigarh

3.

B.E.

Industrial & Production Engg.                 

2007

JEC Jabalpur

Work Experience:

S. No.

Post

Institute

Year

1. Assistant Professor SGSITS, INDORE Oct 25 Till now
2. Assistant Professor MANIT, Bhopal

July 2016 to Oct. 2018 

3.

Assistant Professor        

NIT Jalandhar              

Jan 2010 to June 2012                      

Research Details:

 Research Interests

  • Advanced Machining,
  • Composite Materials,
  • Non-traditional machining processes,
  • Optimization
Publications:

1.       Research Paper Publications

(I)      International/National Journal Publications

1.      Rajak U., Chaurasiya P., Verma T., Dhakar K., Nagdeve L. (2021) “Numerical Study on the Effect of Engine Characteristics by Using Ethanol-Moringa-Diesel Fuel” Kuwait Journal of Science (I.F. 0.65)

2.      Nagdeve L., Dhakar K., Kumar H. (2020) “Development of novel finishing tool into Magnetic Abrasive Finishing process of Aluminum 6061” Materials and Manufacturing Processes, Vol. 35 (10); pp. 1129-1134 (I.F. 3.35).

3.      P Chaurasiya, P Pandey, U Rajak, K Dhakar, M Verma, T Verma “Epidemic and challenges of coronavirus disease-2019 (COVID-19): India response” https://dx.doi.org/10.2139/ssrn.3569665

4.      Dhakar K., Kumar A., Mishra P. M., and Soda S., (2019) “Green Supply Chain Barriers Analysis using Interpretive Structure Modelling (ISM)” International Journal of Logistics Systems and Management DOI:10.1504/IJLSM.2020.10025356. (SCOPUS)

5.      Dhakar K., Chaudhary K., Dvivedi A. and Bembelge O. (2019) “An Environment Friendly and Sustainable Machining Method: Near-dry EDM” Materials and Manufacturing Processes, Vol. 34 (12); pp. 1307-1315 (I.F. 3.35).

6.      Rohilla V., Dhakar K., Sharma R., Singla Y., (2019) “Experimental Evaluation of Magnetic Abrasive Finishing Process with Diamond Abrasive” International Journal of Materials and Product Technology, Vol. 58 (1); pp. 55-70 (I.F. 0.67).  

7.      Dhakar K., Dvivedi A. and Dhiman A., (2016) “Experimental Investigation on Effects of Dielectric Mediums in Near-dry Electric Discharge Machining” Journal of Mechanical Science and Technology, Vol. 30 (5); pp. 2179-2185. (I.F. 1.22)

8.      Dhakar K., and Dvivedi A., (2015) “Parametric Evaluation on Near-Dry Electric Discharge Machining” Materials and Manufacturing Processes, Vol. 31 (4); pp. 413-421 (I.F. 3.35).

9.      Pandey H., Dhakar K., Dvivedi A., and Kumar, P., (2015) “Parametric Investigation and Optimization of Near-Dry Electrical Discharge Machining” Journal of Scientific and Industrial Research, Vol. 74 (9); pp. 508-511 (I.F. 0.77)

10.  Dhakar K., Pundir, H., Dvivedi, A., and Kumar, P., (2015) “Near-dry electrical discharge machining of stainless steel” International Journal of Machining and Machinability of Materials, Vol. 17 (2); pp. 127-138. (SCOPUS)

11.  Dhakar K., Pundir, H., and Dvivedi, A., (2014) “Optimization and Comparison of Near-dry EDM and Dry EDM of Inconel 718” Journal of Production Engineering, Vol. 17 (2); pp. 25-29.

12.  Dhakar K., and Dvivedi A., (2017) “Experimental Investigation on Near-dry EDM using Glycerin-Air Mixture as Dielectric Medium” Materials Today, Vol. 4 (4), pp. 5344-5350. (SCOPUS)

13.  Dhakar K., and Dvivedi A. (2017) “Influence of Glycerin-air Dielectric Medium on Near-dry EDM of Titanium Alloy” International Journal of additive and subtractive materials manufacturing Vol. 1 (3/4); pp. 328-337.

 

(II)    International/National Conference Publications

1.      Singh S., Nagdeve L., Kumar H., Dhakar K. “Rice Straw Based Natural Fiber Reinforced Polymer for Sustainable Bio-Composites: A Systematic Review” 6th International conference on Advanced Production and Industrial Engineering (ICAPIE-2021), 18th–19th June 21.

2.      Patel M., Sangral S., Jayprakash M., Yadav R., Dhakar K. “Mechanical behaviour of titanium foam fabricated using NH3HCO3 space holder through powder metallurgy route” 6th International conference on Advanced Production and Industrial Engineering (ICAPIE-2021), 18th–19th June 21.

3.      Verma T. N., Chaurasiya P. K., Rajak U., Dhakar K., Nagdeve L. (2020) “A Numerical Study on the Effect of Engine Characteristics by Using Ethanol-Moringa-Diesel Fuel” International Conference on Energy, Materials Sciences & Mechanical Engineering (EMSME-2020), 30th Oct. - 1st Nov. 2020, NIT Delhi

4.      Gupta P. K., Dhakar K., Rajoria C. S. (2020), “An Influence of Pulse Frequency on Hole-Making Performance of Ceramics by ECDM”, International Conference on Advancements in Mechanical Engineering (ICAME-2020), 16th – 18th Jan, 2020, Aliah University, Kolkata, India

5.      Nigam A., Makwana A., Sharma R., Nagdeve L., Dhakar K. (2019) “Preliminary Experimental investigations into Magnetic Abrasive Finishing of Aluminum Shaft” 11th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore

6.      Dhakar K., Dandekar M. and Paliwal D. (2019) “An Overview on Recent Advancements in Electrical Discharge Machining Methods” 6th International Conference on Production & Industrial Engineering, (6th CPIE 2016) NIT Jalandhar.

7.      Dhakar K., and Dvivedi A. (2018) “A Comparative Experimental Investigation of Electric Discharge Machining Process Variants” TMS Annual Meeting & Exhibition Materials Science and Technology (MS&T 2018), Columbus, Ohio, USA

8.      Dhakar K., Chaudhary K., Dvivedi A. and Kumar P. (2017) “Green Machining Process: Near-dry Electric Discharge Machining” TMS Annual Meeting & Exhibition, Pan American Materials Congress, Florida, USA.

9.      Bhagoria P. and Dhakar K., (2017) “Parametric study of Electric Discharge Machining of HSS” International Conference on Mechanical, Energy & Power Systems (ICMEPS), Oriental, Bhopal.

10.  Dhakar K., and Dvivedi A. (2016) “Experimental Investigation on Near-dry EDM using Glycerin-Air mixture as Dielectric Medium” 6th International Conference on Materials Processing and Characterization (6th ICMPC-2016), Victoria University, Melbourne Australia.

11.  Dhakar K., and Dvivedi A. (2016) “Influence of Glycerin-air Dielectric Medium on Near-dry EDM of Titanium Alloy” 4th International Conference on Production & Industrial Engineering, (4th CPIE 2016) NIT Jalandhar.

12.  Kumar R., Dhakar K., Singh K., Singh I. and Dvivedi A. (2015) “Parametric investigation of Electric Discharge Sawing process for MMCs” 24th International Conference on Processing and Fabrication of Advanced Materials (PFAM) Kansai University Osaka, Japan, pp. 448-457.

13.  Dhakar K., and Dvivedi A., (2014) “Experimental Investigation on Near-dry Electric Discharge Machining” 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR) IIT Guwahati, pp. 404-1-6

14.  Dhakar K., and Dvivedi A., (2014) “Study of the Near-dry Electric Discharge Machining” 23rd International Conference on Processing and Fabrication of Advanced Materials (PFAM) IIT Roorkee, pp. 499-504.

15.  Dhakar K., Arora P., and Dvivedi A., (2014) “Effect of Process Parameters of Near-dry EDM on Machining of a Conductive Material” 23rd International Conference on Processing and Fabrication of Advanced Materials (PFAM) IIT Roorkee, pp. 511-517.

16.  Dhakar K., and Dvivedi A., (2013) “Experimental Investigation of Green Electric Discharge Machining of Al-SiC Metal Matrix Composites” International Conference on Smart Technologies for Mechanical Engineering (STME) DTU Delhi, pp. 883-885.

17.  Dhakar K., and Dvivedi A., (2013) “Prediction of Material Removal Rate in Near-dry Electrical Discharge Machining Using Adaptive Neuro-Fuzzy Inference System” International Conference on Research and Innovations in Mechanical Engineering (ICRIME) GNDEC Ludhiana.

18.  Dhakar K., and Belokar R., (2011) “JIT in Supply Chain Management” 4th International Conference on Management next: Paradigm and Innovation, Gyan Jyoti Mohali, Punjab.

19.  Dhakar K., and Soda S., (2011) “The Evolution of Green Supply Chain Management and Trends Influencing Future Concepts” International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Punjab, pp. 150-154.

(III) Book Chapter

1.      Dhakar K., and Dvivedi A. “Dry and Near-dry Electric Discharge Machining” Advanced Manufacturing Technologies - Modern Machining, Advanced Joining, Sustainable Manufacturing, Springer International Publishing DOI: 10.1007/978-3-319-56099-1.

2.      K Dhakar, M Dandekar, M Tyagi “Advances in Electrical Discharge Machining: State-of-the-Art” Manufacturing Engineering, pp. 245-254.

Projects:

       Projects

S.No.

Project Title

Name of Sponsoring Agency

Amount Sanctioned

1.

AICTE IDEA Lab

AICTE

1,10,00,000/-

2.

Development of Portable Near-dry Electric Discharge Machining

MHRD, NPIU

895000/-

3.

Investigation of Mechanical and Environmental Properties of Bamboo Fibre Reinforced Polymer Matrix Composites Fabricated by Compression Molding and Injection Molding Process

MHRD, NPIU

1142000/-

4.

Fretting Fatigue and Fretting Wear Behaviour of Titanium Foam Under Simulated Body Fluid Environment 

MHRD, NPIU

1538000/-

5.

Investigating the Effect of Temperature, Humidity and Particulate Matter on Corrosion in Galvanized Sheet Metal at Indian Atmosphere

PANASONIC

1500000/-

6.

Entrepreneurship Awareness Camp (EAC)

DST-NIMAT

20000/-

Testing & Consultancy:


Consultancy

1.      Biotech Era Transforming India (BETI)

2.      DSAND Animal Nutrition Pvt. Ltd.

 

Other Details:

1.   List of Conferences/Workshops/Seminars Organized

1.      ATAL FDP on Artificial Intelligence in Design and Manufacturing

2.      AICTE-RGPV Online TTP on Processing and Characterization of Novel Materials.

3.      Organized Entrepreneurship Awareness Camp

4.      Convention on Making Policies for Promoting Innovation, Entrepreneurship and Startups



2.       Invited Lectures/Expert Talks/Chairmanships at Conferences                                              

1.      Expert talk Delivered at S.V. Polytechnic, Bhopal

2.      Expert Lecture Delivered at SAGE University, Indore

3.      Expert Lecture Delivered at S.V. Polytechnic, Bhopal

4.      Session chaired in International Conference (COPEN) at IIT, Indore

5.       Session chaired in International Conference (CPIE) at NIT, Jalandhar

6.      Session chaired in International Conference (EMSME) at NIT, Delhi

7.      Jury Member in State level Project Competition at SIRT, Bhopal



3.       Editor/Reviewer in International Journal

1.      Guest Editor in Materials Today’s

2.      Journal of Machining Science and Technology

3.      International Journal of Precision Engineering and Manufacturing – Green Technology    

4.      Proceedings of the Institution of Mechanical Engineers, Part B

5.      The Electrochemical Society Journals

6.      Journal of Advanced Manufacturing System

7.      International Journal of Advanced Manufacturing Technology

8.      Journal of Manufacturing Processes

9.      Journal of Materials Engineering and Performance

Mr. Praveen Mimrot

  • Designation:  Assistant Professor
  • Employee ID: 9910
  • Qualification:  M.E.
  • Date of Joining: 05/08/2015
  • : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
Education and Qualification:

S. No.

Degree

Specialization

University/Board

1

Master of Engineering

Computer integrated

Manufacturing (Production)

Shri G. S. Institute of

Technology and Science, Indore

2

Bachelor of Engineering

Industrial & Production Engineering

Shri G. S. Institute of Technology and science,

Indore

Work Experience:
S.No.TypeTitleYear
 1      
Research Details:
S.No.TypeTitleYear
 1      
Publications:
S.No.TypeTitleYear
 1      
Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mr. Sumit Dwivedi

  • Designation:  Assistant Professor
  • Employee ID: 5010
  • Qualification:  M.E.
  • Date of Joining: 12-01-2018
  • Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Mr. Sumit Dwivedi has done his B.E. in Mechanical Engineering from Vindhya Institute of Technology and Science, Satna and M.E. in Computer Integrated Manufacturing from Shri G.S. Institute of Technology and Science, Indore. He is associated with the Institute since Jan 2018 as Assistant Professor in the Department of Industrial Production Engineering under Institute contract. He has more than 4 years of teaching experience with GATE and ESE exams. His research interest includes Modelling and Simulation, Finite Element Analysis and Additive Manufacturing Processes.
Education and Qualification:

S. No.  

Degree              

Specialization

Year

University/Board

1.

M.E.

Computer Integrated Manufacturing             

2017       

RGPV, Bhopal (M.P.)           

2.

B.E.

Mechanical Engineering

2014

RGPV, Bhopal (M.P.)

Work Experience:
S.No.TypeTitleYear
 1      
Research Details:
  • 3D Modelling and Simulation,
  • Finite Element Analysis
Publications:

1.       Research Paper Publications

(I)      International/National Journal Publications

Sumit Dwivedi1, M.D. Mahajan2

“Cost optimization of engine rocker cover by Introducing nylon 66 in manufacturing”

Industrial Engineering Journal

Vol. X & Issue No. 8, August – 2017.

Sumit Dwivedi1, Ankit Chauksey2

“Weight Optimization of Connecting Rod of Internal Combustion Engine Using Finite Element Analysis”

International Journal for Research Trends and Innovation

Volume 2, Issue 9, 2017 | ISSN: 2456-3315.

(II)    International/National Conference Publications

Sumit Dwivedi1, M.D. Mahajan2

“Comparison of modal characteristics of beam structure using analytical and finite element analysis”

Proceedings of the National Seminar on Advances in Materials, Manufacturing and Renewable Energy Systems (AMMRES 2018)

Babu Banarasi Das National Institute of Technology & Management Lucknow, August 17-18, 2018.

Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Dr. Kumar Rohit

  • Designation: Assistant Professor
  • Employee ID: 5101
  • Qualification: Ph.D.
  • Date of Joining: 27-08-2021
  • Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: He is a faculty member here in the subject domains of industrial and production engineering, product design, and business/product analytics. He got awarded his doctorate of philosophy (PhD) degree in the research domain of 'design and development of new automotive model variants (NAMVs)' specifically related to the broad subject areas of 'New Product Design' and 'Product Analytics' from the Indian Institute of Technology (IIT) Kharagpur. He has his PG degree: Master of Engineering (ME) in the discipline of ‘Industrial and Production Engineering (IPE)’ with the specialization in Industrial Engineering and Management (IEM) from Shri Govindram Seksaria Institute of Technology and Science (SGSITS) Indore scoring 83.10% (First Division with Honours) and UG degree: Bachelor of Engineering (BE) in the core discipline of Mechanical Engineering from the University Institute of Technology (UIT) Bhopal scoring 75.50% (First Division with Honours). He taught in government and private academic institutions both on a regular basis and as a visiting faculty member also and worked as a TA instructor (at IIT Kharagpur) in the academic courses related to the disciplines of industrial engineering and operations management, manufacturing science, mechanical engineering, management science, and business analytics curriculums. He has an academic experience of nearly 3.5 years as a teaching experience and research and academic experience (along with working on NPTEL project) of 7 years 11 months at IIT Kharagpur with an overall regular experience of about 12 years. Apart from this, he was a visiting faculty at the National Institute of Technical Teachers' Training and Research (NITTTR) Bhopal to teach one of the courses – 'Supply Chain Management' at PG Level in the ME, Advanced Production Systems (APS) curriculum on a short-term basis. He was also an adjunct faculty at Centre for Research in Materials Management (CRIMM), Indian Institute of Materials Management (IIMM), Kolkata where he was assigned supervision of Fellow theses as a 'Junior Research Guide' for the 'Fellowship Program in Materials Management'. His research areas of interest are new product design, product analytics, mathematical modelling and design of supply chain contracts, coordination policies and advanced inventory systems, world-class manufacturing (WCM), design for industrial safety systems (SLC Model, IEC 61508 Safety Standard, SIS, HAZOP, HIRA), and safety analytics. He is an active professional member of European Operations Management Association (EurOMA), India Chapter of Production and Operations Management Society (POMS), Indian Institution of Industrial Engineering (IIIE: SM), Quality Circle Forum of India (QCFI: LM), and Indian Society of Technical Education (ISTE: LM). He actively participated and contributed as a member of these renowned professional societies. He got awarded with MHRD, Govt. of India, Institute Fellowship in the year 2013 (autumn session) towards the fulfilment of his degree of ‘Doctorate of Philosophy (PhD)’ at Indian Institute of Technology (IIT) Kharagpur. He had been also nominated as the jury member at 29th, 30th, and 31st Chapter Conventions on Quality Concepts – CCQC 2016, CCQC 2017 and CCQC 2018 consecutively organized for the industry-based resource persons by Quality Circle Forum of India (QCFI), Kolkata Chapter at Taj Bengal, Kolkata, as one of his professional accomplishments. His other professional accomplishments are getting full-funded institute grants by the Indian Institute of Technology (IIT) Kharagpur to internationally attend two of the best listed academic international conferences in his research domain – one of these, “Production and Operations Management Society (POMS) 28th Annual Meeting (POMS - 2017)” at Seattle, Washington State (WA; US), and another one, “25th Annual European Operations Management Association (EurOMA 2018) Conference” at Budapest University of Technology and Economics, Budapest (Hungary).
Education and Qualification:

No.

Degree

Year

University/Institute

Division

Specialization

1.

Ph. D.

2020

Indian Institute of Technology (IIT) Kharagpur

NA

New Product Design (NPD) and Product Analytics

2.

M.E.

2012

Shri Govindram Seksaria Institute of Technology and Science (SGSITS) Indore

First (with Honours)

Industrial Engineering and Management (IEM)

3.

B.E.

2007

University Institute of Technology (UIT) Bhopal

First (with Honours)

Mechanical Engineering

Work Experience:

S. No.

Designation

Department

Employer

Duration

1

Assistant Professor

Industrial & Production Engg.

SGSITS, Indore

From 27-08-2021 Till Date

2

Adjunct Faculty

Centre for Research in Materials Management (CRIMM)

IIMM Kolkata

From 16-08-2018 to 10-06-2019

4

Assistant Professor

Industrial & Production Engg.

SGSITS, Indore

09-01-2013 to 31-05-2013               

5.

Assistant Professor

Dept. of Mechanical Engineering

TIT-C Bhopal

(26-07-2012 to 08-01-2013)

6.

Lecturer

Dept. of Mechanical Engineering

ASCT Bhopal

(25-07-2008 to 24-07-2010)

Research Details:
  • Application Areas of New Product Innovativeness (NPI) and New Product Design/Development (NPD) Research
  • Design and Development of New Automotive Model Variants (NAMVs) –Critical Capabilities and NPD Success Measures influencing the NPD process of NAMVs in the Automotive Industry
  • Product Analytics: Application of Analytics and Statistical Tools and Techniques – R-programming Software, Structural Equation Modeling (SEM) using AMOS 24 Version Software and CRAN-R Package of Simulated SEM (SIMSEM) and IBM SPSS Statistics 22 Version in NPD Research
  • Industry 4.0 and Internet of Things (IoT)
  • Best Practices in Smart Manufacturing and Smart Product Development
  • Mathematical Modelling, Formulation and Design of Supply Chain Contracts and Other Coordination Policies between the Supply Chain Partners
  • Mathematical Modelling and Formulation of Special Cases in Inventory Systems/Models (e.g.; Models based on Inventory-dependent Demand) in the Supply Chain Network
  • Implementation Aspects of Advanced Techniques in Industrial Safety – Safety Life Cycle (SLC) Model, IEC 61508 Safety Standard, Hazard and Operability Analysis (HAZOP), Hazard Identification and Risk Assessment (HIRA), and Safety Analytics
  • Best Practices in World-class/Lean Manufacturing (WCM/LM) – KANBAN System, Single Minute Exchange of Die (SMED), Total Productive Maintenance (TPM), and Value Stream Mapping (VSM) and Value Stream Analysis (VSA)
PhD Supervision: PhD under Supervision: 01
Name of the PhD Candidate:  Ms. Rita Nagwal
Research Domain:  Circular Supply Chain integrated with Industry 4.0 Technologies/Applications
Title of the PhD Thesis: “Performance Improvement of Circular Supply Chain employing Industry 4.0 Applications for SMEs
Current Status:  PhD Thesis Submitted

Fellow Thesis supervised as an Adjunct Faculty (Junior Research Guide) in ‘Fellowship Program in Materials Management’ of Centre for Research in Materials Management (CRIMM), Indian Institute of Materials Management (IIMM), Kolkata: 01
Name of the Fellow Candidate: Mr Pachamuthu Sengottaiyan
Research Domain: Lean Manufacturing, Supply Chain Management 
Title of the Fellow Thesis: “Enabling Indian MSME’s to face the Global Challenges - A Research based Road Map”
Current Status:  Completed

Publications:

 

Technical Papers’ Publications

 

International/National Journals

[1]

Rohit, K., Ghosh, K.K., Bhattacharya, S., and Pal, P., (2021), “Development of Integrated Framework to introduce New Automotive Model Variants: An Analytic Approach”, Technovation (SCI and Web of Science Indexed; H-Index: 121) [Under 2nd Phase of Review] 

[2]

Rohit, K., and Ghosh, K.K., , “Mathematical Modelling and Formulation of Buyback Supply Chain Contract under the Impact of Inventory-dependent Demand Rate Function: A Profit-sharing Mechanism for Supply Chain Partners”, Cogent Engineering (ESCI and Web of Science Indexed; H-Index: 24) [Accepted/In-Press]

[3]

Rohit, K., Ghosh, K.K., and Bhattacharya, S., (2018), “Significance of Industrial Engineering Competencies to Introduce New Automotive Variants: A Study Perspective”, Industrial Engineering Journal, XI (2), pp.14-19

[4]

Kanungo, B., Rohit, K., and Thakar, G., (2017), “Unknowingly Accepting Health Hazards in Daily Routine Life – A Survey in a Small Town of Madhya Pradesh”, Industrial Engineering Journal, X (6), pp.29-33

[5]

Rohit, K., Bhattacharya, S., and Guin, K.K., (2016), “Assessing the Stock-Dependency Attribute of Demand Rate Function and Its Applicability: A Study Perspective”, Industrial Engineering Journal, IX (7), pp.06-10

[6]

Rohit, K., Gupta, R.C., Thakar, G.D., and Mahajan, M.D., (2014), “Assessment of Safety Life Cycle (SLC) Model to Overcome the Safety Hazards: A Case Study”, Industrial Engineering Journal, VII (4), pp.20-24

[7]

Rathaur, G., Rohit, K., Dandekar, M.D., and Thakar, G.D., (2014), “Performance Evaluation of Value Stream Analysis (VSA): Case Study of a Manufacturing Unit”, Industrial Engineering Journal, VII (10), pp.18-22

Book Chapters

[1]

Rohit, K., Verma, P.L., and Ghosh, K.K., (2018), “Assessment of Significance of Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard towards its Implementation in the Foundry Shop: Case Study of a Pump Manufacturing Industry”, “Industrial Safety Management : 21st Century Perspectives of Asia; Managing the Asian Century (Springer Series), Springer Nature - Scientific Publishing Services (P) Ltd., Singapore, pp.129-141, Chap.10 (eBook – ISBN: 978-981-10-6328-2; electronic – ISSN: 2364-5865) 

[2]

Rohit, K., Ghosh, K.K., Gupta, R.C., and Bhattacharya, S., (2019), “Prioritization of Critical Attributes to introduce New Automotive Model Variants: A Sustainable Model Framework for Technological Innovation”, “Proceedings of the International Conference on Technology Innovation and Data Sciences (ICTIDS 2019)” (Accepted for Publication as a Book Chapter in Springer Series), Springer Nature - Scientific Publishing Services Pvt. Ltd.

[3]

Rohit, K., Rathaur, G., and Dalpati, A., (2012), “Effectiveness of the Seven Value Stream Mapping (VSM) Tools towards Lean Improvement: Case Study of a Manufacturing Unit”, “Advances in Operations and Supply Chain Management”, Society of Operations Management (SOM), Indian Institute of Technology (IIT) Delhi, New Delhi (India), Vol.1, pp. 450-458, Chap.42 (Manufacturing Systems, Strategies and Management)

[4]

Rohit, K., Mahajan, M.D., and Kanungo, B., (2012), “Implication of Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard in an Engineering Industry”, “Business Innovations and Entrepreneurship – Transforming World Economy”, Excel Books, New Delhi (India), pp.443-450, Chap.50 (ISBN: 978-93-5062-004-5) 

[5]

Rohit, K., (2011), “Case-Analysis on eCRM in Online Banking”, “Management Perspectives –Emerging Trends and Leadership Challenges”, Popular Book Depot, Jaipur (India), Vol.1, pp.355-366, Chap.54 (Section – Information Technology) (ISBN: 978-81-86098-06-6) 

 

Technical Papers – International /National Conferences

[1]

Rohit, K., Ghosh, K.K., and Bhattacharya, S., (2018), “Development of a conceptual framework to introduce new automotive variants: Insights from new product development research in automotive domain”, “Proceedings of the 25th Annual European Operations Management Association (EurOMA 2018) Conference”, Budapest (Hungary)

[2]

Rohit, K., Bhattacharya, S., and Ghosh, K.K., (2018), “Designing the supplier-based revenue sharing contract for the goods experiencing inventory-dependent demand: A mathematical framework”, “Proceedings of the 25th Annual European Operations Management Association (EurOMA 2018) Conference”, Budapest (Hungary)

[3]

Rohit, K., Ghosh, K.K., Bhattacharya, S., and Gupta, R.C., (2017), “Study of Best Operations Management Practices as Key Organizational Competencies to introduce New Automotive Variants: Insights from the New Product Development Research in Automotive Domain”, Proceedings of the XXI Annual International Conference of the Society of Operations Management (SOM 2017)”, Ahmedabad University, Ahmedabad (India)

[4]

Rohit, K., Bhattacharya, S., Guin, K.K. and Ghosh, K.K., (2017), “Design of a Mathematical Framework for Supplier-Based Revenue Sharing Coordination Policy under Inventory-dependent Demand Rate”, “Proceedings of the Production and Operations Management Society (POMS) 28th Annual Meeting (POMS - 2017)”, Bellevue-Seattle, Washington State (WA; USA)

[5]

Rathaur, G., Rohit, K., and Dalpati, A., (2017), “Assessing the Effectiveness of Value Stream Analysis towards the Lean Improvements: An Application-Based Approach”, “Proceedings of the Production and Operations Management Society (POMS) 28th Annual Meeting (POMS - 2017)”, Bellevue-Seattle, Washington State (WA; USA) 

[6]

Rohit, K., Guin, K.K., Ghosh, K.K., and Bhattacharya, S., (2016), “Comparison of the Modelling Aspects of the Supplier-based Revenue Sharing Coordination Policy with the Non-Coordinated Case under the Impact of Stock-Dependent Demand Rate Function: A Review”, “The Fifth Biennial Supply Chain Management Conference”, Indian Institute of Management (IIM), Bangalore (India)

[7]

Rohit, K., Verma, P.L., and Ghosh, K.K., (2016), “Assessment of Significance of Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard towards its Implementation in the Foundry Shop: Case Study of a Pump Manufacturing Industry”, Proceedings of the International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems (MESH 2016)”, Indian Institute of Technology (IIT), Kharagpur (India)

[8]

Titiyal, R., Guin, K.K., and Rohit, K., (2016), “Framework Development for Planning and Scheduling of Operation Theatres: A Study Perspective”, “Proceedings of the International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems (MESH 2016)”, Indian Institute of Technology (IIT), Kharagpur (India)

[9]

Zuhair, M., Rohit, K., and Titiyal, R., (2016), “Business Model Canvas for “Preventive Care” towards the Innovation in Healthcare Operations: An Indian Scenario Framework”, “Proceedings of the International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems (MESH 2016)”, Indian Institute of Technology (IIT), Kharagpur (India)

[10]

Rohit, K., and Ghosh, K.K., (2017), “Implementation Aspects of SLCM Approach using IEC 61508 Safety Standard in the Foundry Shop: Case Study of a Pump Manufacturing Industry”, “Proceedings of the International Conference on Quality Management Practices (ICQMP 2017)”, Quality Circle Forum of India (QCFI) - Kolkata Chapter, Kolkata (India)

[11]

Dutta, D., Dalpati, A., and Rohit, K., (2016), “Analysis of Bullwhip Effect (BWE) in Overstock and Under-Stock Situations: A Review”, “Proceedings of the International Conference on E-Business and Supply Chain Competitiveness (EBSCC 2016)”, Excel India Publishers (New Delhi; India), Indian Institute of Technology (IIT), Kharagpur (India), Vol.1(ISBN: 978-93-85777-16-5)

[12]

Rohit, K., Bhattacharya, S., and Guin, K.K., (2016), “Measuring the Impact of Supply Chain (SC) Contracts on Stock-Dependent Demand Rate Function: A Study Perspective”, “Proceedings of the International Conference on E-Business and Supply Chain Competitiveness (EBSCC 2016)”, Excel India Publishers (New Delhi; India), IIT Kharagpur (India), Vol.1 (ISBN: 978-93-85777-16-5)

[13]

Rohit, K., Bhattacharya, S., and Guin, K.K., (2015), “Assessing the Effect of Supply Chain (SC) Contracts on Stock-Dependent Demand Rate Function: A Review”, Proceedings of the XIX Annual International Conference of the Society of Operations Management (SOM 2015)”, Indian Institute of Management (IIM) Calcutta, Kolkata (India)

[14]

Singh, H., Rohit, K., Thakar, G.D., and Kanungo, B., (2013), “Design of an Optimal Kanban System: Case Study of a Mixed Model Assembly Line”, “Proceedings of the 2nd International Conference on Industrial Engineering (ICIE 2013), Excellent Publishing House (New Delhi; India), SVNIT, Surat (India), Vol.1, pp.376-380 (ISBN: 978-93-83083-37-4)

[15]

Ranjan, L.K., Rohit, K., and Thakar, G.D., (2013), “Application of Grey Relational Analysis (GRA) to Material Selection for Sustainable Product Design: A Multi Attribute Decision Making (MADM) Approach”, “Proceedings of the 2nd International Conference on Industrial Engineering (ICIE 2013), Excellent Publishing House (New Delhi; India), SVNIT, Surat (India), Vol.1, pp.209-213 (ISBN: 978-93-83083-37-4)

[16]

Jain, N., Dalpati, A., Thakar, G.D., and Rohit, K., (2013), “Supplier Selection and Evaluation in Automobile Industry: Application of AHP Approach”, “Proceedings of the 2nd International Conference on Industrial Engineering (ICIE 2013), Excellent Publishing House (New Delhi; India), SVNIT, Surat (India), Vol.1, pp.204-208 (ISBN: 978-93-83083-37-4)

[17]

Rohit, K., Rathaur, G., and Dalpati, A., (2012), “Effectiveness of the Seven Value Stream Mapping (VSM) Tools towards Lean Improvement: Case Study of a Manufacturing Unit”, “Proceedings of the XVI Annual International Conference of the Society of Operations Management (SOM 2012)”, Indian Institute of Technology (IIT) Delhi, New Delhi (India), Vol.1, pp. 450-458

[18]

Rohit, K., Mahajan, M.D., and Kanungo, B., (2012), “A New Approach towards Safety Management-Safety Life Cycle Management (SLCM) and its Implication Prospective”, “Proceedings of the ECSB 2012”, IIT Roorkee (India), Vol.1, pp.1562-1576 (ISBN 978-93-81583-46-3)

[19]

Rathaur, G., Rohit, K., Dandekar, M.D., and Dalpati, A., (2012), “Mapping the Current State Value Stream: Case Study of a Manufacturing Unit”, “Proceedings of  the ECSB 2012”, IIT Roorkee (India), Vol.1, pp.1772-1783 (ISBN 978-93-81583-46-3)

[20]

Rohit, K., Mahajan, M.D., and Kanungo, B., (2012), “Implication of Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard in an Engineering Industry”, “Proceedings of the 6th PIMR International Conference”, PIMR, Indore (India), pp.443-450 (ISBN 978-93-5062-004-5)

[21]

Pathariya, A.K., Agrawal, N. and Rohit, K., (2012), “Effect of various Blade Cooling means on Steam Injected Reheat Gas Turbines”, “Proceedings of the 2nd NSCTEA-2012”, CIST Bhopal (India), Vol.1, pp.18-26

[22]

Rohit, K., (2011), “Case-Analysis on eCRM in Online Banking”, “Proceedings of the International Conference on Management Perspectives (ICOMAP 2011)”, Amity University Rajasthan (AUR), Jaipur (India), Vol.1, pp.355-366 (ISBN 978-81-86098-06-6) 

[23]

Rohit, K., (2011), “Comparative Case-Analysis on Safety Life Cycle Management (SLCM) Approach using IEC 61508 Safety Standard in the Process Industries”, “Proceedings of the International Conference on Industrial Engineering (ICIE 2011)”, Excellent Publishing House (New Delhi; India), Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat (India), Vol.1,  pp.877-880 (ISBN: 93-81361-54-1) 

Projects:


1.       

 

  • Consultancy Project assigned to SGSITS Indore: Project undertaken at Pithampur Auto Cluster (PAC),  Pithampur Industrial Estate, Indore; Role: Co-PI; Project Duration:  April, 2022 to September, 2022 (6 Months) 
  • Project Details:
  • Title/Domain of the Consultancy Project:  "Visualization of Industry Requirements for Toolroom Facilities"
    Budget Amount: INR 80,000/-
  • Key Insights:
  • Assessment of industry requirements for tooling facilities in conformance to the upgradation of existing facilities in Pithampur Industrial Estate
  • Advancement and digitization of these tooling facilities as per the industry requirements
  • Development of a toolroom that can satisfy the manufacturing firms’ needs in conformance with the tooling facilities
2. A Project on Lean Manufacturing (LM) in the Single Phase Assembly Line: Waste (MUDAs) identification and quantification with the application of value stream mapping (VSM), and value stream analysis (VSA) and provided recommendations for waste elimination deploying the best LM practices  – KANBAN System, SMED, ‘5S’ practices,  Cellular Manufacturing, Pre-Production Planning (3P) at Kirloskar Brothers Limited (KBL), Dewas Unit (Centrifugal/Submersible Pump Manufacturing Unit at Dewas, MP) for a duration of 3 Months (from 15.02.2012 to 16.05.2012)
3. 

Implementation Prospects of Safety Life Cycle (SLC) Model using IEC 61508 Safety Standard and its Implications in the Foundry Shop: To design a safety instrumented system (SIS) against the various induction hazards (associated with the induction furnace) based on their analyses, their safety integrity levels (SIL) determination and allocation for overall safety requirements at Kirloskar Brothers Limited (KBL), Dewas Unit (Centrifugal/Submersible Pump Manufacturing Unit at Dewas, MP) for a duration of 6 Months (from 09.08.2011 to 09.02.2012)

Other Details:

    

Invited Lectures/Talks Delivered

   [1]

Guest Lecture (Visiting Faculty) at National Institute Of Technical Teachers’ Training And Research Institute (NITTTR) Bhopal: Taught ‘Supply Chain Management’ Course at PG Level in the ME, Advanced Production Systems (APS) Curriculum in the year 2013

[2]

Expert Talk at Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore: ‘Know-how about Research Databases (Repositories), Structuring the Manuscripts, Selection of Journals, Publication Criteria and Review Process of Research Articles’ to PG Students from ME (Industrial Engineering and Management) and ME (Computer Integrated Manufacturing) Curriculums in the year 2019.



  • Software Proficiencies:
    1.  Application Software/Quantitative Techniques (QT), Operations Research (OR), and Mathematical Modeling-based Software Proficiencies 
  •   IBM ILOG CPLEX Optimization Studio (CPLEX Optimizer)   
  •   EXCEL Solver and Advanced EXCEL Worksheet
  •   OR Software: COIN-OR, LINDO, LINGO, TORA, Mathematica
  •  Basics of R-Programming/R-Studio

2.  Statistical Software

  •   SEM – CRAN-R package of Simulated SEM (SIMSEM)
  •   AMOS Software (for Structural Equation Modeling) of IBM SPSS 24 Ersion, and IBM SPASS Statistics Version.


Foreign Universities/Abroad Visits:

v  Seattle (Bellevue), Washington State (WA), and San Francisco, California (CA), United States (US) in the Year 2017: Attended and Presented Two (2) Research Articles in Production and Operations Management Society (POMS) 28th Annual Meeting (POMS - 2017) at Hotel Hyatt Regency, Bellevue, Seattle, Washington State (WA) organized by University of Washington, Washington State (WA)

v  Budapest (Hungary) along with Other Countries visited in the Schengen Region – Vienna (Austria), Paris (France) and Frankfurt (Germany) in the Year 2018: Attended and Presented Two (2) Research Articles in 25th Annual European Operations Management Association (EurOMA 2018) Conference at Budapest University of Technology and Economics, Budapest (Hungary)



    8.

Details of  Short-term Courses/Workshops/Seminars Attended

[1]

Global Initiative for Academic Networks (GIAN) Course on  “Optimization for Innovation in Research and Practice” for a duration of 2 Weeks (from 27th June 2016 to 08th July 2016) at Indian Institute of Technology (IIT), Kharagpur (India)

[2]

Global Initiative for Academic Networks (GIAN) Course on  “Healthcare Operations and Innovation” for a duration of 2 Weeks (from 06th June 2016 to 17th June 2016) at Indian Institute of Technology (IIT), Kharagpur (India)

[3]

Global Initiative for Academic Networks (GIAN) Course on  “Production and Operations Management” for a duration of 2 Weeks (from 23rd May 2016 to 03rd June 2016) at Indian Institute of Technology (IIT), Kharagpur (India)

[4]

International Summer and Winter Term (ISWT) Course on “Supply Chain Network – Modeling and Analysis” for a duration of 2 Weeks (from 15th  June 2015 to 26th June 2015) at Indian Institute of Technology (IIT), Kharagpur (India)

[5]

Author Workshop on “Scholarly Publishing” by Wiley of One (1) Day on 23rd March 2015 organized by Wiley in collaboration with Indian Institute of Technology (IIT), Kharagpur (India)

[6]

“Author Workshop” by Springer of One (1) Day on 16th  January 2015 jointly organized by Springer and Indian Institute of Technology (IIT), Kharagpur (India)

[7]

3rd Recent Trends in Industrial Engineering (RTIE 2013) of One (1) Day on 6th  April 2013 at Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat (India)

[8]

2nd  Recent Trends in Industrial Engineering (RTIE 2013) of One (1) Day on 21st  April 2012 at Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat (India)

[9]

Short-term Certification Course on “Statistical Process Control (SPC)” of Two (2) Days (from 28th March 2006 to29th March 2006) at Central Institute of Plastic Engineering and Technology (CIPET), Bhopal (India)

Ms. Angur Bala Jayant

Designation:  Assistant Professor
Employee ID: 0506042
Qualification:  M.E.
Date of Joining: 23/08/2021
Contact : 0731-2582371
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Detailed Profile
About Faculty: Mrs. Angur Bala Jayant has done his B.E. in Mechanical Engineering and M.E. in CAD CAM CAE from Shri G.S. Institute of Technology and Science, Indore. She joined the Institute in July 2019 as Assistant Professor in the Department of Industrial Production Engineering under the Institute contract. She has more than 5 years of teaching experience in various leading institutes in Indore Her research interest includes Reverse Engineering (RE), Modelling and Simulation, Finite Element Analysis and Additive Manufacturing Processes
Education and Qualification:

S. No.   

Degree

Year

University/Institute

Specialization

1

M.E.                          

2014                     

RGPV, BHOPAL/SGSITS,INDORE                                          

CAD CAM CAE (Hons.)

2

B.E.

2012

RGPV, BHOPAL/SGSITS,INDORE

MECHANICAL ENGG.

3

DIPLOMA

2007

RGPV, BHOPAL

MECHANICAL ENGG.(Hons.)

Work Experience:
S.No.DesignationInstitute/OrganizationDuration
 1.  Asst. Professor (Industrial &Production Engg.)  SGSITS, INDORE   2019 till date
 2.  Asst. Professor (Dept. of Mechanical Engg.)  ACROPOLIS TECHNICAL CAMPUS (ATC) Indore  2017 - 2019
 3.  Asst. Professor (Dept. of Mechanical Engg.)   LNCTS (RIT), Indore  2015 - 2017
Research Details:
  • Reverse Engineering (RE),

  • Modelling and Simulation,

  • Finite Element Analysis 

  • Additive Manufacturing Processes.

Publications:
1.  Kishor Kumbharde1, A. B. Jayant 2

 “Experimental Study of Loop Thermosyphon Solar Water Heater Using Water and Cuo Nanofluid as Working Fluid”

 INTERNATIONAL JOURNAL OF INNOVATION IN ENGINEERING RESEARCH & MANAGEMENT ISSN :2348-4918

 
   
Projects:
S.No.TypeTitleYear
 1      
Testing & Consultancy:
S.No.TypeTitleYear
 1      
Other Details:
S.No.TypeTitleYear
 1      

Mrs. Mahima Hardiya Zaveri

  • Designation: Assistant Professor
  • Employee ID: 
  • Qualification: M.E.
  • Date of Joining: 23/08/2022
  • 0731-2582372 
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  •   Detailed Profile
About Faculty: Mrs. Mahima Hardiya joined the department in August 2022 as an Assistant professor in this institute. She has obtained her B.E. degree in Industrial and Production Engineering from SGSITS Indore, in the year 2009. She has received her Master of Engineering in Industrial Engineering and Management (IEM) from SGSITS, Indore in 2021. She has experience of teaching as visiting faculty at SGSITS for 8 months from Nov 2021 to June 2022. Her research interest is in Industrial engineering and supply chain management.
Education and Qualification:

No.

Degree

Year

University/Institute

Marks

Specialization

 1 Ph D Persuing Devi Ahilya Unversity Indore -- Supply Chain Finance

2

ME

2021

SGSITS, INDORE (RGPV Bhopal)

85%

Industrial Engineering Management(IEM)

3

BE

2009

SGSITS, INDORE (RGPV Bhopal)

58.3%

Industrial and production

4

12th

2002

Scholar's Yard School Indore (M.P. Board of Secondary Education Bhopal)

70.4%

PCM

Work Experience:
  1. Joined as Assistant Professor at IPE deptt SGSITS Indore... 08 August 2022
  2. Visiting Faculty at SGSITS for 8 months  (From : NOV2021 TO JUNE 2022)
Publications:
  1. Mahima Hardiya, Dr. Milind Dandekar, Dr Krishnakant Dhakar.“Productivity improvement in an engine assembly line through (MOST) Maynard Operation Sequence Technique-A case study”, Industrial Engineering Journal, Vol XIV& issue No. 05 May-2021, pp 27-31.
Projects:

Ms. Nisha Sahu

  • Designation: Assistant Professor
  • Employee ID: 
  • Qualification: M.E.
  • Date of Joining: 30/08/2022
  • 0731-2582372 
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  •   Detailed Profile
About Faculty: Ms. Nisha Sahu joined the department in August 2022 as an Assistant professor in this institute. She has obtained her M.E. degree in Industrial Engineering and Management from SGSITS Indore, in the year 2019. She has received her B. E. in Mechanical Engineering from GEC Rewa in 2014. She has nearly 3 years of experience in teaching
Education and Qualification:

No

Degree

Year

University/Institute

Marks

Specialization

1

ME

2019

SGSITS, INDORE

85%

Industrial Engineering and Management

(IEM)

2

BE

2014

GEC, REWA

75.9%

Mechanical Engineering

3

12th

2010

S.K.Girls Higher Secondary School Rewa M.P.

80.2%

M.P. Board Bhopal M.P.

4

10th

2008

S.K.Girls Higher Secondary School Rewa M.P..

82%

M.P. Board Bhopal M.P.

Work Experience:

(i)      

2.9 years with IIM, Indore as an Academic Associate in Operations Management and Quantitative Techniques. (Nov 2019 to Aug 2022)

(ii)    

1.4 years with JNCT Rewa as Contractual Assistant Professor in Mechanical Engineering (Feb, 2016 to June, 2017)

Research Details:

Area of Research Interest:

Value Stream Mapping

Assembly Line Balancing

Operations Management

Digital Supply Chain Management

Publications:

Journal Papers -
Nisha Sahu, Dr. Atma Ram Sahu, Raviraj Garg, Prof. R C Gupta,
Productivity Study in Vibratory Compactor Assembly Line using work study’, Udyog Pragati Journal ISSN 0970-3365 Volume 42 ( Issue No. 3).

Conference Papers

Nisha Sahu, ‘Improvement of Manufacturing Operations at an Automobile Industry by using Value Stream Mapping’, “International Conference on Industrial and Manufacturing Systems (CIMS-2020)” organized by Department of Industrial and Production Engineering,Dr. B. R. Ambedkar National Institute of Technology Jalandhar .

Nisha Sahu, Atma Ram Sahu, Raviraj Garg, Prof. R.C.Gupta, ‘Productivity Study in Vibratory Compactor Assembly Line using work study’, “Conference of Centre for Excellence in Research and Education (CERE-2022)” organized by Indian Institute of Management Indore M.P.



Other Details: List of Seminars and workshops attended...

S.No

Title

Organized By

Date

1

Operations Management and Six Sigma

IIM Raipur

October 2020- March 202

2

Optimization Tools in Manufacturing Process

   

3

One week STTP Supply Chain Management Challenges and Strategies

NIT Jalandhar

 

4

RBCDAI’s International Summit on Data Science andAI

IIT Madras

 

5

Webinar on Smart Manufacturing

   

6

One week STTP An Approach towards Cutting Edge Competition

SVVV Indore

 

7

Electric Vehicles : Aspects of Manufacturing

   

8

Entrepreneurship Awareness Camp

SGSITS INDORE

 

9

FDP on Additive Manufacturing in Industry 4.0Strategy

AICTE

 

10

Data Analysis with Python

INTERNSHALA

 

Mr. Shrivardhan Bhargava

  • Designation: Assistant Professor
  • Employee ID: 0605173
  • Qualification: M. Tech.
  • Date of Joining: 03 Aug, 2023
  • Contact : ---
  • Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Shrivardhan is working as Assistant Professor in IPE department since August 2023.
Education and Qualification:

Educational Qualification

S.No

Degree

Specialization

Year

University/Board

1

M.E.

Manufacturing Engineering

2023

RGPV, Bhopal

2

B.E.

Mechanical Engineering

2020

RGPV, Bhopal

Work Experience:

Professional Experience

S.No.

Name of Organisation

Position

From

Till

1.

Shri GS Institute of Technology & Science, Indore

Assistant Professor

03 Aug, 2023

Present

Research Details: Research interests in following fields -

  • Composite Material
  • Advanced Manufacturing Processes
  • Advance Machining Processes.
Publications:
  1. Title of Book Chapter, Shrivardhan Bhargava, Kumar Rohit, Krishnakant Dhakar and T. S. Srivatsan, “Processing and Fabrication of Sisal Fibers Reinforced Composites: A Conceptual Review.”, Bentham Books, Bentham Science Publishers Executive Suite, U.A.E.

  1. Title of the paper, “Adarsh Jaiswal, Krishnakant Dhakar, Shrivardhan Bhargava, Sumit Dwivedi, “Fabrication and Characterization of Natural Fiber Reinforced Composite Utilizing Natural Binders as a Matrix Phase: A Conceptual Review.” 5th International Conference on Contemporary Advances in Mechanical Engineering (ICCAME-2024).

  1. Title of the paper, “Ashutosh Sharma, Shrivardhan Bhargava, Krishnakant Dhakar, Sumit Dwivedi, Adarsh Jaiswal A Comparative investigation on CO2 Laser Cutting of Bamboo Fiber-Reinforced composites.” 5th International Conference on Contemporary Advances in Mechanical Engineering (ICCAME-2024).

Other Details:

Achievement

Dr. Durgesh Joshi Memorial Gold Medal Award, S.G.S.I.T.S. Indore

Gold Medal Award for being Overall Aggregate (Merit) Topper of Master of Engineering, I.P.E. Department.

April, 2022

Dr. Kailash Rai

  • Designation: Assistant Professor
  • Employee ID:  0605223
  • Qualification: Ph. D.
  • Date of Joining: 
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Detailed Profile
About Faculty: Dr Kailash Rai is PhD in Mechanical Engineering from Mewar University. He has 13 years of experience in Teaching. He has published a book on Industrial Engineering & Human Factor Engineering. He also holds two patents on his name
Education and Qualification:

S.No.

Degree

Specialization

Year

University/Board

1

Ph.D.

Mechanical Engineering

2019

Mewar University

2

M.E.

Industrial Engineering & Management

2011

RGPV, Bhopal

3

B.E.

Mechanical Engineering

2008

RGPV Bhopal

Research Details: Research Interests in following areas
  • Production and Operations Management
  • Industrial Engineering
  • Quality Management
PhD Supervision: ---
Publications:

Book Published

Industrial Engineering & Human Factor Engineering” is published with IPH publisher, ISBN 978-1-954461-32-1

Research Papers

Title of research paper “Design and comparative analysis of truck chassis” published in International Journal “IRJMETS” vol. 5, issue 3, March 2023

One paper published in International Journal “IJETMR” vol.1, issue 1, “New Production Technology for Textile Industries”.

Title of research paper “Mass Customization Practices for Manufacturing Industries” published in International Journal “IJIET” vol. 6, issue 2, Dec 2015.

Title of research paper “New Production Technology for Manufacturing Industries” published in International Journal “IJR”, vol. 3, issue 14, Oct-2016.

Title of research paper “Mass Customization is New Trend for Textile Industries”, in IJDR, Vol. 1, issue 2, Feb 2017.

Title of research paper “Mass Customization: A Research Report on Textile Industries in India”, in IJNIET, Vol. 8, issue 2, May 2018.

Title of research paper “Mechanical Scheduling in a Piston manufacturing industry using Value Stream Mapping, in IJRAR, Vol. 5, issue 1, Feb. 2018, pp-29-35.

Title of research paper “Scheduling automobile selection by using Multi Attribute Utility Technique & Linear Programming, in IJRAR, Vol. 5, issue 6, April 2018, pp- 16-23.

Title of research paper “Comparative study and optimization of hydraulic press with different materialsin JASRAE, Vol. XIV, issue 2, January 2018, pp- 1342-1351.

Title of research paper “Failure mode analysis of a CNC machine by FMEA and Grey Relational Analysis Approach, in JASRAE, Vol. XV, issue 1, April 2018, pp-893-898.

Title of research paper “Analysis of conveyor belt materials with different carcass material”, in JASRAE, Vol. XV, issue 1, April 2018, pp-887-892.

Title of research paper “Failure Analysis of Head Gear Pulley with different materials using FEA, in IJRAR, Vol. 5, issue 2, April 2018, pp- 24-28.

Title of research paper “Mechanical Testing on Magnesium Matrix Composites by adding different percentages of SiC, in IJRAR, Vol. 6, issue 1, March 2019, pp- 953-956.

Title of research paper “Lean Production using Value stream Mapping and Kanban, in IJRAR, Vol. 6, issue 1, March 2019, pp- 966-973

Title of research paper “Heat Transfer Analysis on Ribs in Solar Air Heater Duct by CFD: A Review Report”, in IJREISS, Vol. 9, issue 4, April 2019, pp- 11-13

Title of research paper “Risk analysis and optimization in Production line by using FMEA and RPN method, in IJRAR, Vol. 6, issue 2, April 2019, pp- 941-947

Title of research paper “Evaluation of Mechanical properties of PVC through applying different Mechanical tests, in IJRAR, Vol. 6, issue 2, April 2019, pp- 948-952.

Title of research paper “Approach for Raw Material Quality Control in aGelatine Manufacturing Plant Using Statistical Tools, in IJREISS, Vol. 9, issue 5, May 2019, pp- 410-415.

Title of research paper “Comparisons of Tensile Strength of Bamboo Fiber and Glass Fibre Epoxy Composite, in JASRAE, Vol. 16, issue 6, May 2019, pp- 1567-1571.

Title of research paper “Failure Mode Assessment in Production Line by Using FMEA and RPN Method, in JASRAE, Vol. 16, issue 6, May 2019, pp- 1557-1566.

Title of research paper “Heat Transfer Analysis on Ribs in Solar Air Heater Duct by CFD: A Review Report” in IJREISS, Vol. 9, issue 4, April 2019, pp- 11-13.

Conference/ Seminars/ Webinar

Title of research paper “Mass Customization in Textiles Industries” presented in AMITY University, Jaipur, Rajasthan, in international conference

Title of research paper “Problems in Textile Industries for Mass Customization” presented in SVITM, Indore, in national conference

Title of paper “Generation Next Nuclear Power Plants”, in national seminar organized by Premier Engineering. College, Jabalpur, held on 12th May 2016

Title of research paper is “New Technologies for Mass Customization” is presented in the “ICITMR” 2014.

Attended webinar on “Smart Manufacturing” organized by department of IPE, SGSITS, Indore

Attended webinar on “Advanced Techniques for Energy Efficient Devices and MATLAB coding” organized by department of Mechanical Engineering, SGSITS, Indore.

Projects: ---
Testing & Consultancy: ---
Other Details:

4. Patent

A project “Pipe support assembly to avoid bending of pipe” design accepted and published in journal no. 02/2021 and dated 08/01/2021, application no. is 326431-001 and Cbr no. 1736.

A project related to “Microchannel heat sink with Fins” is filed for publication, application no. is 373410-001 and Cbr no. is 207891 dated 02/11/2022. Status of design is accepted and published in journal no. 02/2024 dated 12/01/2024.

Copyright © 2021 SGSITS. All Rights Reserved.
Last Updated On: 04 December 2024
Designed and Developed by CRISP
X

Publish the Menu module to "offcanvas" position. Here you can publish other modules as well.
Learn More.

Move to Top