SHRI GOVINDRAM SEKSARIA INSTITUTE OF TECHNOLOGY & SCIENCE, INDORE

An Autonomous Institute Run by Govt. of Madhya Pradesh

Affiliated to Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal & Devi Ahilya Vishwavidyalaya, Indore

Mr. Rahul Suman

  • Designation: Assistant Professor
  • Employee ID: 0505203
  • Qualification:  M.E.
  • :
  • E-mailrahulsuman1122@gmail.com
  • Detailed Profile
About Faculty: Rahul Suman is currently working as an Assistant Professor in Mechanical Engineering Department. He has working experience of more than 7 years in technical education. His area of interest is Analysis of various Expansion chamber, Design and Thermal, various FEA and design software’s, etc
Education and Qualification:
S. No. Degree Specialization Year University/Board
1 M.E. Design & Thermal Engineering 2015 DAVV, INDORE
2 B.E. Mechanical Engineering 2013 RGPV, Bhopal
3 HSC Science Mathematics 2009 ISC Board
4 High School All Subjects 2007 ICSC Board
Work Experience:
S. No Designation Department Employer  Name Duration of Employment
1 Assistant Professor Mechanical Engineering SGSITS, Indore 01/08/2023 to Till date
2 Assistant Professor Mechanical Engineering  I.E.T-DAVV, INDORE 01/08/2018 to 30/07/2023
3 Assistant Professor Mechanical Engineering PIEMR, INDORE 03/082015 to 16/07/2017
Publications:
  1. Gupta A.K. and Suman Rahul, “An Approach for Transmission Loss Validation and Measurement of Various Reactive Mufflers with FEA Acoustic Module”, International Journal for Research in Applied Science & Engineering Technology (IJRASET) , Volume 3 Issue VI, June 2015, ISSN: 2321-9653
       2. Gupta A.K. and Suman Rahul, “Effect of Changing Aspect Ratio, Expansion Ratio and Ovality Parameter on Expansion Chamber for the Performance of Transmission Loss “, International Journal Of Research Science & Management ISSN: 2349-5197, July 07 2015
Other Details:
1. Organizing committee member in organizing the event BAJA SAE 2010 when Acropolis Institute of Technology and Research, Indore was the organizer and the Host of      event SAE BAJA -2010 from 29th -31st January 2010.
2. Done DRIVER’s training of FORMULA car held at Kari Motor Speedway, Coimbatore from 16th- 20th August 2012 for SUPRA SAEINDIA -2012 held at Budh International    Circuit-2012

Dr. Shubham Jain

  • Designation: Assistant Professor
  • Employee ID: 0505201
  • Qualification:  Ph.D.
  • :
  • E-mailshubhamjainmanit01@gmail.com
  • Detailed Profile
About Faculty: Dr. Shubham Jain currently working as an Assistant Professor in the Mechanical Engineering Department at Shri G S Institute of Technology and Science Indore India. He has 08 journal publications and 1 book chapter. He has a current research interest in Advanced Manufacturing Processes & Optimization.
Education and Qualification:
S. No. Degree Specialization Year University/Board
1 Ph.D. Process Improvement 2023 MANIT Bhopal
2 M.Tech. Maintenance Engineering 2017 MANIT Bhopal
3 B.E. Mechanical 2013 SGSITS Indore
Work Experience:
S. No. Designation Department Employer  Name Duration of Employment
1. Assistant Professor Mechanical Director, SGSITS August 2, 2023 to till date.
Research Details:
  1. Advanced Manufacturing Process.
  2. Optimization
  3. Biomedical material & biomedical devices.




















Publications:
Sr.NO.

SCIE Journal

1 Shubham Jain & Vishal Parashar "Critical review on the impact of EDM process on biomedical materials," Materials and Manufacturing Processes, Vol.36(15), pp.1701-1724, 2021. (SCIE Indexed Q2 Journal Impact Factor 4.783).https://doi.org/10.1080/10426914.2021.1942907
2 Shubham Jain & Vishal Parashar "Comparison of priori and posteriori approach of multiobjective optimization for WEDM on Ti6Al4V alloy", Materials Research Express, Vol. 9(7), pp.076504. (SCIE Indexed Q2 Journal Impact Factor 2.025) https://doi.org/10.1088/2053-1591/ac7f83
3 Shubham Jain & Vishal Parashar "WEDM process parameters optimization by preference based CS & PSO algorithm for LCP," Materials and Manufacturing Processes, 2023. (SCIE Indexed Q2 Journal Impact Factor 4.783) https://doi.org/10.1080/10426914.2023.2165669
4 Shubham Jain & Vishal Parashar (2022) "Analytical review on the biocompatibility of surface-treated Ti-alloys for joint replacement applications," Expert Review of Medical Devices," Vol 19(9), pp 699-719, 2022. (SCIE Indexed Q1 Journal Impact Factor 3.439) https://doi.org/10.1080/17434440.2022.2132146
 

SCOPUS Journal

1 Jain, S. and Parashar, V. "Analysis of high-speed CNC milling of Ti-6Al-4V by multiobjective crow optimization and multi-objective PSO", Int. J. Materials Engineering Innovation, Vol. 13(2), pp.128–156, 2022. (SCOPUS Indexed Q3 Journal Citation Index 1.60)
2 Jain, S. and Parashar, V. "Optimisation of EDM process parameters: by butterfly optimization algorithm and genetic algorithm," Int. J. Computational Materials Science and Surface Engineering, Vol. 11(1), pp.21–46, 2022. (SCOPUS Indexed Q3 Journal Citation Index 0.90)
3 Shubham Jain & Vishal Parashar "Optimization of CNC Face Milling Process Parameters Using Response Surface Methodology and Particle Swarm Optimization Algorithm" International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) Vol. 10(3), pp.645–654, 2020. (SCOPUS Indexed Q4 Journal Citation Index 0.70)
 

Conference/ Book Chapter

1 S. Jain, A. Soni, V. Parashar, and P. Reddy, "Analysis of Kerf in Wire cut Electric Discharge Machining using RSM and Whale Optimization Algorithm," 2021 4th Biennial International Conference on Nascent Technologies in Engineering (ICNTE), Navi Mumbai, India, 2021, pp.
2
3
  • Vishal Parashar, Shubham Jain, and P. M. Mishra, "Optimization of Tool Wear Rate Using 

    Artificial Intelligence–Based TLBO and Cuckoo Search Approach" in Artificial Intelligence, Internet of Things (IoT) and Smart Materials for Energy Applications, Edition 1st, Editor, Mohan Lal Kolhe, Kailash J. Karande, and Sampat G. Deshmukh: Boca Raton, CRC Press, 2023, pp. 21-33. https://doi.org/10.1201/9781003220176 (BOOK CHAPTER)

Dr. Mangal Singh Lodhi

  • Designation: Assistant Professor
  • Employee ID: 505180
  • Qualification:  PhD
  • :
  • E-mailmslodhi@sgsits.ac.in
  •   Detailed Profile
About Faculty: Dr. Mangal Singh Lodhi is currently working as an Assistant Professor in the Department of Mechanical Engineering at Shri G. S. Institute of Technology and Science Indore (MP), India, since August 2023. His research areas are Computational Fluid Dynamics, Convective Heat Transfer, Microfluidic Systems and Electronics Cooling. He has published 05 International Journal papers, 05 National/International Conferences and 01 book chapter.
Education and Qualification:
S. No. Degree Specialization Year University/Board
1. Ph.D. Thermal Engineering 2021 PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
2. M.E. Heat Power Engineering 2013 Jabalpur Engineering College, Jabalpur
3. B. E. Mechanical Engineering 2011 Samrat Ashok Technological Institute, Vidisha
Work Experience:
S. No. Designation Department Employer  Name Duration of Employment
1. Assistant Professor Mechanical Engineering Shri G. S. Institute of Technology & Science, Indore

1.0 Year

(03/08/2023–Present)
2. Assistant Professor Mechanical Engineering Samrat Ashok Technological Institute, Vidisha

2.0 Year

(31/08/2021–02/08/2023)
3. Lecturer Mechanical Engineering University Polytechnic, RGPV, Bhopal

0.5 Year

(03/02/2014–30/06/2014)
Publications:

Book Chapters:

S. No. Title Author’s Name Publisher Year of Publication
1 Fluid Flow and Temperature Distribution in Microchannel Heat Sink with Z-Type Flow Arrangement: An Experimental Investigation

D. S. Rawat,

M. S. Lodhi,

T. Sheorey
Fluid Mechanics and Fluid Power, Lecture Notes in Mechanical Engineering, Springer, Singapore 2023








International Conferences Papers:

S. No. Authors(s) Title of Paper Name of Conference Page Year
1

DS Rawat,

MS Lodhi,

T Sheorey
Fluid flow and temperature distribution in microchannel heat sink with Z-type flow arrangement: An Experimental Investigation 48th National conference on Fluid Mechanics and Fluid Power 55-58 2021
2

MS Lodhi,

T Sheorey, G Dutta
Mitigation of fluid flow and thermal non-uniformity in MEMS devices: Numerical investigation 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference 63-68 2019
3

A Arora, RC Gupta,

MS Lodhi
Cooling performance analysis of loop heat pipe using nanofluid 5th International Conference Computational Methods for Thermal problems 35-38 2018
4

MS Lodhi, G Dutta,

T Sheorey
Cooling of MEMS devices using nanofuids 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference 1287-1294 2017
5

MS Lodhi, G Dutta,

T Sheorey
A numerical model to predict the feasibility of alumina nanofluids in a microchannel 10th International Conference on Computational Heat, Mass and Momentum Transfer   2017

 






















International Journal Papers:

S. No. Author(s) Title of Paper Name of Journal Volume Page Year
1.

MS Lodhi,

T Sheorey, G Dutta
Mitigation of fluid flow and thermal non-uniformity of nanofuids in microfluidic system applied to processor chip: A comparative analysis of mass versus thermal mitigation Microsystem Technologies 27 1877-1893 2021
2.

M S Lodhi,

T Sheorey, G Dutta
Single-phase fluid flow and heat transfer characteristics of nanofluids in a circular microchannel: Development of flow and heat transfer correlation IMechE Part C: J Mechanical Engineering Science 234 3689-3708 2020
3. A Arora, MS Lodhi, R C Gupta Cooling performance of micro heat pipe used for mobile electronic devices International Journal of Engineering Sciences and Research Technology 7 331-341 2013
4. MS Lodhi, RC Gupta

Experimental study of thermal performance of heat pipe using

nanofluid: A review
International Journal of Emerging Trends in Engineering & Development 3 187-195 2013
5  MS Lodhi, RC Gupta  

Experimental study of thermal performance of heat pipe using

CuO/water nanofluid
 International Journal of Engineering Sciences and Research Technology  2  2048-2054  2013

 

Other Details:
S.NO.

International Conferences/Workshops/FDP Courses Organized:

1
38th M. P. Young Scientist & Science Festival (MPYSC-2023), Organized by SATI Vidisha(MP) and M. P. Council of Science and Technology Bhopal (MP) during March 17 - 19, 2023.
2
1st International and 4th National Conference on Reliability and Safety Engineering (INCRS-2018), Organized by Discipline of Mechanical Engineering, PDPM IIITDM Jabalpur (MP) during February 26 - 28, 2018.
3
International Conference on Physics and Mechanics of New Materials and Their Applications (PHENMA-2017), Organized by Discipline of Mechanical Engineering, PDPM IIITDM Jabalpur (MP) during October 14 - 16, 2017.
4
Workshop on Innovations and the Society Organized by Jabalpur Academia Initiative (JAI), PDPM IIITDM Jabalpur (MP) during December 5 - 6, 2016
5
AICTE Sponsored STC on Numerical and Analytical Techniques to Undertake Research in Engineering (NATURE) Organized by Discipline of Mechanical Engineering, PDPM IIITDM Jabalpur (MP) during September 1 - 5, 2017.
 

International Conferences/Workshops/FDP Courses Participated:

1
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Organized by Department of Mechanical and Industrial Engineering, IIT Roorkee (UK) during December 28 - 31, 2019
2
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Organized by Department of Mechanical Engineering, BITS-Pilani Hyderabad Campus Hyderabad (TS) during December 27 - 30, 2017
3 2nd One-Week Workshop on Technical Writing using LaTeX, Organized by School of Electronics Engineering, VIT-AP University, Amaravati (AP) during April 7 - 13, 2022
4
Symposium on Engineer your Research for Start-up, Organized by CAD-CAM Centre, Department of Mechanical Engineering, VNIT Nagpur (MH) during March 1 - 5, 2021
5
Design Workshop (DEW-2017) on Industrial Internet and Industry 4.0 Organized by PDPM IIITDM Jabalpur (MP) during December 9-11, 2017
6
DST-SERB Sponsored STTP on Battery Thermal Management Systems: Present and Future, Organized by Department of Mechanical Engineering, SVNIT Surat (GJ) during June 12 - 16, 2023
7
ATAL FDP on Smart manufacturing tools and Techniques for industry 4.0, Organized by Department of Mechanical Engineering, OIST Bhopal (MP) during November 14 - 24, 2022
8
ATAL FDP on An Essence of Multiphase Flow: Challenges and Futuristic Technology, Organized by Department of Mechanical Engineering, SVNIT Surat (GJ) during December 20 - 24, 2021
9
ATAL FDP on Cutting-edge multidisciplinary research in the field of fluids, Organized by Department of Mechanical Engineering, NIT Rourkela (RRK) during October 11 - 15, 2021
10
ATAL FDP on Additive Manufacturing: Programming, Operation & Applications, Organized by Department of Industrial & Production Engineering, Dr. BR Ambedkar NIT Jalandhar (PB) during September 20 - 24, 2021
11
FDP on Ethics & Values in Technical Educducation Nation in Context of National Education Policy-2020, Organized by Centre for Value Based Education, DTU Delhi (DL) during April 15 - 19, 2021
12 TEQIP-III Sponsored STC on Computational and Experimental Techniques in Heat Transfer and Fluid Flows, Organized by Department of Mechanical Engineering, NIT Uttarakhand (UK) during March 1 - 5, 2021
13 ATAL FDP on 3D Printing & Design, Organized by Department of Mechanical Engineering, IIT Ropar (PB) during February 1 - 5, 2021
14 FDP on LaTeX, Organized by School of Computer Science and IT, DAVV, Indore (MP) in association with Spoken Tutorial Project, IIT Bombay (MH) during May 30 - 31, 2020
15 GIAN Course on Thermal Management of Electronics, Organized by Department of Mechanical Engineering, NIT Warangal (TS) during October 30 - November 3, 2017
   

Awards and Recognitions

 1  Recipient of Certificate of Fellowship for Training of Young Scientist during 34th M.P. Young Scientist Congress - 2019 by M.P. Council of Science and Technology, Bhopal, Government of Madhya Pradesh.
 2  Recipient of Doctoral Fellowship from Ministry of Human Resources Department, Govt. of India during 2014-2019.
 3  Recipient of Graduate Aptitude Test in Engineering (GATE) - 2011 Scorecard with All India Rank 15171 out of 81175 in Mechanical Engineering.

Mr. Rahul Singh Mourya

  • Designation: Assistant Professor
  • Employee ID: 0505108
  • Qualification:  M.Tech.
  • :
  • E-mail: :rahulmourya1992@gmail.com
  • Detailed Profile
About Faculty: I, Rahul Singh Mourya currently an Assistant Professor in the Department of Mechanical Engineering at SGSITS College Indore. I am currently pursuing my part time PhD in Department of Mechanical Engineering from MNIT Jaipur. My research area is to study the Tribological behavior of High Entropy Alloys: HEAs are showing better performance than traditional alloys. In my research I am further enhancing the properties of high entropy alloys by micro alloying using vacuum arc melting process. I have earned my master degree in Material Science & Engineering from IIT Indore. I have worked on Ceramic Composite Material during my Master Degree. I have earned my B.E. degree with honors in department of Mechanical Engineering from IIST College Indore.
Education and Qualification:
S. No Degree Specialization Year University/Institute
1 PhD. Tribology Pursuing MNIT JAIPUR
2 M.Tech Material Science 2017 IIT INDORE
3 B.E. Mechanical 2014 RGPV
Work Experience:
S. No Designation Department Employer  Name Duration of Employment
1. Assistant Prof. Mechanical MLVTECH Bhilwara Jan 2018 to Aug 2021
Research Details:

High Entropy Alloys, Laser Surface Alloying, Ceramic Coating, Tribology.

Mr. Amit Soni

  • Designation: Assistant Professor
  • Employee ID: 0505202
  • Qualification:  M.E.
  • :
  • E-mail: amitsoni729@gmail.com
  • Detailed Profile
About Faculty: I Completed, M.E. from SGSITS Indore on 2013 and B.E. from GGITS Jabalpur in Mech. Engg. on 2011. I am Interest is Tribology and Maintenance Engineering, Design and Drawing, AutoCAD, Creo-2.0, 3D Modeling I has a total of apx. 8 yrs of teaching and Industrial experience.
Education and Qualification:
S. No Degree Specialization Year University/Board
1 M.E. Tribology and Maintenance Engineering 2013 S.G.S.I.T.S. Indore
2 B.E. Mechanical Engineering 2011 G.G.I.T.S. Jabalpur
Work Experience:
S. No Designation Department Employer  Name Duration of Employment
1 Assistant Professor Mechanical Engg SAGE University Indore 3 year 7month
2 Assistant Professor Mechanical Engg SGSITS Indore 3 year
3 Design Engineer R & D Param tech PVT 1year 1 month
Publications:
Sr.No. Title
1 “Experimental Study of the Performance of Automobile Radiator Heat Transfer by Using Different Coolants” International Journal of Research Publication and Reviews IJRPR 14566, 19 Aug 2022.
2 Renewable Energy and Its Application in Madhya Pradesh: A Review” International Conference of Advance Research and Innovation (ICARI-2021) 30 Jan 2021.
3 “Application of Quality Function Deployment in Healthcare Services: A Review” International Journal for Research in Applied Science and Engineering Technology (IJRASET) ID: IJRASET30707 Volume 8, Issue VII, July 2020
4

“Assessment of Damage in Beam through Vibration Indices and AI Technique” International Journal of Research in Technology and Management (IJRTM) ISSN 2454-6240.

Projects:
Mail the One Research Proposal in COUNCIL OF SCIENTIFIC AND         INDUSTRIAL            RESEARCH (CSIR) “Automatic Floor Cleaner with Performance and Based on mobile Application”
Other Details:

1. Attended 6-Days Short Term Training Program Sponsored by AICTE : “3D Printing Technology in Biomedical Field” in V.S.B. Engineering College Karur        TamilNadu India,      Dated 22 May - 27 May 2021

2. Attended One Week Faculty Development Program Sponsored by TEQIP- III : “Concepts & Applications of Composite Materials” in Indira Gandhi Institute of Technology,        Sarang Dhenkanal Odisha Dated 23 Feb – 27 Feb 2021

3. Attended 6-days Faculty Development Program: Training Placement and IndustryInteraction Cell in SAGE University, Indore. Dated 11 Jan - 16 Jan 2021

4. Attended 3-days Faculty Development Program: Industry 4.O in SAGE University, Indore. Dated 25 Aug - 27 Aug 2020

5.  Attended 6-days Faculty Development Program: Training Placement and Industry Interaction Cell in SAGE University, Indore. Dated 11 May - 16 May 2020

6.  Attended 5-days Faculty Development Program: SUMMER FDP CUM WORKSHOP in SAGE University, Indore. Dated 01 Jun - 05 Jun 2020

7.  One day workshop for NATIONAL MATHEMATICS DAY  at S.G.S.I.T.S, INDORE

8.  Two days workshop for ANSYS in Mechanical Engg. Department at S.G.S.I.T.S, INDORE

9.  Industry visit to EICHER MOTORS, PITHAMPUR, INDORE

10. Industry visit to JASH ENGINEERING LIMITED,INDORE

11. Industry visit to BHILAI STEEL PLANT,BHILAI

12. Industry visit to GREY IRON FOUNDRY,JABALPUR

Dr. Jyoti Pandey

  • Designation: Assistant Professor
  • Employee ID: 0505234
  • Qualification:  Ph. D.
  • E-Mail jyoti1192pandey@gmail.com
  • Detailed Profile
About Faculty: Dr. Jyoti Pandey is currently working as an Assistant Professor in the Department of Mechanical Engineering at Shri G. S. Institute of Technology and Science Indore (MP), India, since July 2024. Her research areas are Computational Fluid Dynamics, Heat Transfer, Thermodynamics, Microfluidics and Electronics Cooling. She has published 05 International Journal papers, 07 National/International Conferences Proceedings.
Education and Qualification:
S. No. Degree Specialization Year University/Board
1. Ph.D. Thermal Engineering 2023 PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
2. MTech Thermal Engineering 2018 National Institute of Technology, Raipur
3. B. E. Mechanical Engineering 2015 Jabalpur Engineering College, Jabalpur
Work Experience:
S. No. Designation Department Employer Name Duration of Employment
1. Assistant Professor Mechanical Engineering Shri G. S. Institute of Technology & Science, Indore

0.0 Year

(18/07/2024–Present)
2. Post-Doctoral Fellow Mechanical and Aerospace Engineering Indian Institute of Technology, Hyderabad

1.0 Year

(20/04/2023–05/03/2024)
Publications:

International Conference Proceedings:

S.No Author(s) Title of Paper Name of Conference Page Year
1 Pandey, J.; Ansari, M. Z. Optimisation for Optimum Nozzle Design of the Hybrid Jet-Pillar-Microchannel Heat Sink 1st International Conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022) 253-263 2022
2 Pandey, J.; Husain, A.; Ansari, M. Z.; Al-Azri N Comparison of the parallel microchannel and pin-fin heat sinks: an experimental study International Conference on Materials, Mechanics and Modelling (ICMMM-2022) 845-850 2022
3 Pandey, J.; Husain, A.; Ansari, M. Z.; Al-Azri N Performance analysis of cold plate heat sink with parallel channel and pin-fin International Conference on Materials and Technologies (Material TECH 2021) 3144-3149 2021
4 Pandey, J.; Ansari, M. Z.; Husain, A. Effect of nozzle inclination angle on the performance of hybrid jet impingement microchannel heat sink 1st International Conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICoFT-2020) 887–896 2021
5 Bhattacharyya, S.; Pandey, J.; Chelladurai H.; Husain A.; Ansari, M. Z Numerical and experimental studies on pressure drop in milling parameter optimized aluminum heat sink channel 1st International Conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICoFT-2020) 237–244 2021
6 Pandey, J.; Ansari, M. Z.; Husain, A. Numerical simulation of heat transfer in gradually varying microchannel heat sink 2nd International Conference on Computational and Experimental Methods in Mechanical Engineering (ICCEMME-2019) ----- 2019
7 Pandey, J.; Ansari, M. Z.; Husain, A Comparative study of flow characteristics in uniformly varying microchannel for DI water and nanofluid 2nd International Conference on Trends in Material Science and Inventive Materials (ICTMIM- 2019) ------ 2019





















International Journal :

S.No Author(s) Title of Paper Name of Journal Volume Page Year
1 Pandey, J.; Ansari, M. Z.; Husain, A. Experimental and numerical investigation for hydrothermal performance of the jet impingement microchannel heat sink Journal of Heat and Mass Transfer 146 (072302) 1-13 2024
2 Pandey, J.; Ansari, M. Z.; Husain, A. Performance enhancement using porous slabs in a jet impingement microchannel heat sink Heat Transfer Engineering 44 1903-1925 2023
3 Pandey, J.; Ansari, M. Z.; Husain, A. Artificial neural network and numerical analysis for performance enhancement of hybrid microchannel-pillar-jet impingement heat sink using Al2O3-water and CuO-water nanofluids Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 9814-9827 2022
4 Pandey, J.; Ansari, M. Z.; Husain, A. Performance analysis of hybrid microchannel heat sink for varying nozzle geometry and layout on the basis of first- and second-law of thermodynamics Journal of Mechanical Science and Technology 35 5753–5764 2021
5 Pandey, J.; Ansari, M. Z.; Husain, A. Optimization of porous slab parameters for jet-impingement microchannel heat sink performance enhancement International Journal of Numerical Methods for Heat & Fluid Flow 32 2659-2681 2021



Other Details:

International Conferences/Workshops/FDP Courses Participated:

S. No   

         Title Name

1

INUP-i2i familiarization workshop on nanofabrication technologies held at CeNSE, IISc Bangalore, India during 12-14 September, 2022.

2

Design Workshop 8.0 (DeW) titled “Future of Design Thinking and 3D Printing in Healthcare” organized by PDPM-IIITDM Jabalpur, MP, India from 16-18 February, 2022.

3

Short-term course on the “Emerging Materials for Biomedical Engineering” at PDPM- IIITDM, Jabalpur, India during January 30-31, 2022.

4

Short-term course on the theme “Modeling Approach in Micro-Machining Processes” organized by the department of Mechanical Engineering, Pandit Deendayal Petroleum University (PDPU), Gandhinagar, Gujarat, India from 26–30 October, 2020.

5

Faculty development program on “Material Processing and Characterization: Current Prospective” organized by Industry Institute Interaction Cell, department of Mechanical Engineering in association with Indian Welding Society, during August 31 to September 4, 2020.

6

Short-term course on “Industry 4.0 and Smart Manufacturing: Opportunities and Challenges” organized at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India from 20-24 July, 2020.

7

Short-term course on “Hybrid Manufacturing Processes: Opportunities and Challenges” organized at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India from 06-10 July, 2020.

8

Webinar on “Indo-German Bilateral Funding Programmes for Advanced Industrial Research” organized at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India in association with Indo- German Science and Technology Centre on June 26, 2020.

9

Short-term course on “Additive Manufacturing with Interdisciplinary Applications” organized at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India from June 29-July 3, 2020.

10

1st International Conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022) at Z. H. College of Engineering and Technology, AMU Aligarh, UP, India, during December 1-3, 2022.

11

International Conference on Materials, Mechanics and Modelling (ICMMM-2022) at National Institute of Technology Jamshedpur, Jharkhand, India, during April 4-6, 2022.

12

International Conference on Materials and Technologies (Material TECH 2021) at National Institute of Technology Raipur, Chhattisgarh, India, during January 9-10, 2021.

13

1st International Conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICoFT-2020) at National Institute of Technology Puducherry, Karaikal, India, during December 28- 30, 2020.

14

2nd International Conference on Computational and Experimental Methods in Mechanical Engineering (ICCEMME-2019) at G. L. Bajaj Institute of Technology and Management, Greater Noida, Delhi NCR, India, during May 3-5, 2019.

15

2nd International Conference on Trends in Material Science and Inventive Materials (ICTMIM- 2019) at JCT College of Engineering and Technology, Coimbatore, Tamil Nadu, India, during March 28-29, 2019.

16

National conference on “Computer Applications in Education and Research for Science and Technology: Developments and Prospects (CAERST-2018)” held in NIT Raipur, Chhattisgarh, India, during January 16-17, 2018.

Awards and Recognitions

1

Recieved Best Presenter Award in First International Conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICoFT 2020 MADE@NITPY>) held during 28-30 December 2020 at National Institute of Technology Puducherry.

2

Topped and achieved Elite+Gold Badge in NPTEL course “Effective Engineering Teaching in Practice”.

3

Successfully passed online Proficiency Improvement Programe (oPIP) on “Design and Analysis of ATV using Ansys Software” jointly organized by The Automotive Research Association of India (ARAI), Pune and Ansys Software Pvt Ltd, Pune from May 30 to June 20, 2020.

4

Obtained a CPI of 10.0 out of 10.0 in PhD

5

Scholarship awarded by MHRD (Indian Govt.) in August 2016 (for MTech Program) and August 2018 (for PhD Program)

6

Qualified GATE 2015 and GATE 2016

7

Passed B & C certificate exam of NCC at 4 MPCTR (Indian army wings) with A grade.

Mr. Neeraj Gautam

  • Designation: Assistant Professor
  • Employee ID:  0505235
  • Qualification: M.E.
  • E-Mail dr.gneeraj@gmail.com
  • Detailed Profile
About Faculty: Neeraj Gautam currently working as Assistant Professor in Mechanical Engineering Department at Shri G. S. Institute of Science and Technology, Indore. He has over 16 years of teaching experience in Mechanical Engineering. He has 06 Journal Publications. He has current research interest in Thermal System Design, Machine Design and E-Vehicles.
Education and Qualification:
S. No. Degree Specialization Year University/Board
1 M. E. Design and Thermal Engineering 2017 DAVV, Indore
2 B. E. Mechanical Engineering 2008 RGPV, Bhopal
Work Experience:
S. No. Designation Department Duration of Employment Duration of Employment
1 Assistant Professor Mechanical Engg. SGSITS, Indore Jul 2024 to till date
2 Assistant Professor Mechanical Engg. AITR, Indore Mar 2018 to Jul 2024
3 Assistant Professor Mechanical Engg. PIEMR, Indore May 2015 to Jun 2017
4 Assistant Professor Mechanical Engg. MGI, Indore Aug 2010 to Apr 2015
5 Lecturer Mechanical Engg. IIST, Indore Sept 2008 to Jan 2010
Research Details:

Research Interest: Design of Thermal Systems, Machine Design, E-Vehicles.

Publications:
Sr.No. Title Name
1
  1. Prakash Gawali, Amit Kumar Kundu, Neeraj Gautam “Variation in the mechanical properties of the wire due to variation of speed in wire drawing process”, Journal of Emerging Technology and Innovative Research. 2022 December 1; 9(12): 2349-5162, (176-181)
2
  1. Divyansh Soni, Amit Kumar Kundu, Neeraj Gautam “Hydropower an Efficient Renewable Source of Energy: An Analysis”, International Journal of Advances in Multidisciplinary Topics, 2022 March 1; 3(3): 2582-7839 (79-81)
3
  1. Amit Kumar Kundu, Neeraj Gautam, Veerandra Patil, Prakash Gawali, Hiraman Sikdar, ‘Fundamentals of New Product Development’, Journal of Emerging Technology and Innovative Research, 2021 December 1; 8 (12): 2349-5162 (382-386)
4
  1. Ashish Khare, Neeraj Gautam, et al. “Study of the Variation of Fuel Consumption with Pure Oxygen in Two Stroke Petrol Engine” International Journal of Innovative Research in Science, Engineering & Technology, 2019 January 1; 8 (I): 2347-6710 (40-46)
5
  1. Deepti Rai, Neeraj Gautam “Comparative Analysis of Battery Technologies for Electric Vehicles” Journal of Basic Sciences. 2024 July 1; 23(7): 1006-8341(81-88).
Other Details:
  1. Organized Campus Placement Technical Training for ME final year students (from 2018-2020 to 2020-2024 B. Tech. ME Batch).
  2. Member of organizing committee team BAJA-2020. 21, 22, 23, 24.
  3. GATE Qualified

Get In Touch

Shri Govindram Seksaria Institute of Technology & Science

  • Add: 23 Sir M. Visvesvaraya Marg, Indore, Madhya Pradesh 452003
  • Tel: +91 - 731 - 2544415,+919244078010[M]
  • Email: director[at]sgsits.ac.in, neetesh.purohit@gmail.com
Connect With Us:
Copyright © 2021 SGSITS. All Rights Reserved.
Last Updated On: 05 January 2025
Designed and Developed by CRISP
X

Publish the Menu module to "offcanvas" position. Here you can publish other modules as well.
Learn More.

Move to Top